Bracket Guide

PBC-1
Designed to mount Raytec illuminators to circular poles / columns.
To fit poles approx minimum 50mm up to 170mm (other diameters available on request).
Provides flat mounting platform for 1x RAYMAX or RAYLUX illuminator and Voyager Range. (PSU mounted elsewhere)
Assembly Notes: Mount PBC- 1 to pole using mounting clips – position and tighten. Access to the back of the bracket maybe limited,
it is possible to remove U/AI Circular / Large AI Circular bracket from illuminator, mount bracket to PBC- 1 as shown below.
Fix illuminator to its bracket as shown below. Set the vertical angle of illumination then tighten screws. (please note full pan and tilt
capability can be possible by mounting an illuminator to PBC- 1 bracket using a WB1 bracket – see page 2)
Large Circular Bracket
www.rayteccctv.com
4
UK Tel: [phone] Fax: [phone]
Americas Tel: [phone]