Bracket Guide

DB2 DOUBLE PAN & TILT BRACKET ADAPTOR
Designed to mount any Raytec illuminator (normally 2 units) to a Top Mount Pan/Tilt (PTZ) motor.
The bracket should be fitted between camera housing and PTZ motor. Mounting holes provided to match with most industry
standard PTZ units. Several mounting options provided to mount Raytec illuminator.
Other versions available for specific PTZ motors.
Assembly Notes: Mount DB2 to PTZ unit. Mount illuminator to DB2 – bracket can be mounted above or below DB2. Fix illuminator
to its bracket as shown below. Set the vertical/horizontal angle of illumination then tighten screws.
219.00
141.25
550.00
141.25
Ø8.00
160.00
Please be aware of the maximum width available to
mount camera to DB2.
Image shows an RM/RL 200 series illuminator
mounted on the outer most fixing hole.
Please note: It is not possible to mount an RM/
RL 300 series illuminator on a DB2 bracket.
105
550
109
219
36
www.rayteccctv.com
8
UK Tel: [phone] Fax: [phone]
Americas Tel: [phone]