Installation Guide

ManualsBrandsRaytec ManualsAccessoriesRAYMAX 100, 120-180 degree Adaptive Illumination, 850nm, inc PSU

Installation Steps

1. Mount Illuminator

2. Connect Illuminator to low voltage

power supply

3. Input 12-24V DC/ 24V AC

Optional Set-up (if required)

4. Adjust Power to alter light intensity

5. Adjust Photocell sensitivity

6. Photocell following contact

RM/RL F 100 Setup

7. Telemetry input and photocell

following contact

Set Up Steps

1. Position illuminator adjacent to

camera and point towards scene

2. Adjust vertical and horizontal

position of lamp to ensure full ﬁeld

of view illuminated

3. Tighten all ﬁxings

Package Contents

1. Illuminator including mounting

bracket

(RM/RL F 100 only, includes

additional wiring loom)

illuminators installation guide

RAYMAX / RAYLUX

FUSION illuminator

Overview

This installation guide provides instructions for installing the RAYMAX

and RAYLUX FUSION series illuminators

FUSION

GOLDEN RULES:

• Ensureoperatingvoltageis

correct for unit being installed

(12-24V DC/ 24V AC)

www.rayteccctv.com

Version: 2

Summary of content (8 pages)

PAGE 1
FUSION illuminators installation guide This installation guide provides instructions for installing the RAYMAX and RAYLUX FUSION series illuminators Installation Steps 1. Mount Illuminator 2. Connect Illuminator to low voltage power supply 3. Input 12-24V DC/ 24V AC Optional Set-up (if required) 4. Adjust Power to alter light intensity 5. Adjust Photocell sensitivity 6. Photocell following contact RM/RL F 100 Setup 7. Telemetry input and photocell following contact Overview Set Up Steps 1.
PAGE 2
Bracket LED illuminator Back of Unit ‘Command and Control’ Technology™ Cables RM/RL F 25 & 50 1x four core cable RM/RL F 25 & 50 DC AC Black wire - ~ Red wire + ~ Orange and Brown wires= Photocell following contact. Volt free output. Non polarity sensitive.
PAGE 3
Installation 1 1 Mount illuminator 2 Connect Illuminator to low voltage power supply: Installers can extend or reduce lead length using appropriate cable and weather proof box 3 Input 12-24V DC/ 24V AC 2 Note: Optional Set-up (if required) 4 Note: Factory set to max. power RM/RL F 25 & 50 + Power adjust Power in Adjust Photocell sensitivity. Remove the cover and turn the ‘photocell adjust’ to alter photocell sensitivity to ambient lighting condition.
PAGE 4
Set Up TARGET 1 Position illuminator adjacent to camera and point towards scene (Optional night set-up for optimum image performance) 3 2 Adjust vertical and horizontal position of lamp to ensure full field of view illuminated Tighten all fixings Match illumination to camera field of view x Camera x Light Camera Light Camera Light Reduces performance 4 May cause hot spots Best performance
PAGE 5
Technical Drawings (Not to scale) Standard Bracketry 12.5mm (0.5”) 47mm (1.9”) 25mm (1”) RM/RL F 25 36mm (1.4”) 72mm (2.8”) 25mm (1”) RM/RL F 50 52mm (2”) 104.5mm (4.
PAGE 6
FUSION Specifications Infra-Red Series RM FUSION 100 RM FUSION 50 RM FUSION 25 150m 40m 20m Consumption ~ 35W max 25W max 12W max Input 12-24V DC/ 24V AC 12-24V DC/ 24V AC 12-24V DC/ 24V AC Current 2.6A @ 12V or 1.3A @ 24V 1.5A @ 12V or 0.75A @ 24V 1A @ 12V or 0.5A @ 24V Weight 1.4kg 1.0kg 0.5kg Environment IP66 IP66 IP66 Dimensions LxWxD 180 x 135 x 65 mm (7 x 5.3 x 2.5”) 135 x 100 x 63 mm (5.3 x 4 x 2.
PAGE 7
Trouble Shooting Ensure all tests are undertaken by a qualified, trained engineer. Ensure safe working practices are followed at all times. Step 1: Basics • Check polarity of Lamp connection red=+ve, black=-ve • Ensure power is 12-24V DC/ 24V AC • Check photocell is working-cover photocell, light should turn on.
PAGE 8
UK / Europe T: +44 (0) 1670 520055 F: +44 (0) 1670 819760 sales@rayteccctv.com Americas (Toll Free) T: +1 888 505 8335 ussales@rayteccctv.com www.rayteccctv.