User's Manual Part 2

Operator Manual
2−130
3748DOC020102 Edition: 14.JAN.2005
2.5.3 Select ROUTE (option)
This function allows the transfer of routes, e.g. between an electronic sea chart
NSC ECDIS and the NSC radar.
The route planning is effected via NSC ECDIS (see NSC ECDIS manual).
If the route position (NSC ECDIS) matches with the radar position, the route can
be displayed in the current radar video.
Parallel to the route display, the active cursor of the NSC ECDIS appears in the
radar video, and the active cursor from NSC radar on the display of the NSC
ECDIS.
Precondition:
− route planning via NSC ECDIS
− position alignment of NSC ECDIS and NSC radar
Procedure: (see Figure: 2−75)
Step 1 Open the FUNCTION menu
Step 2 Open the ROUTE function
Step 3 Select the ROUTE view of interest
− HIDE ROUTE, for fading out the complete Route
− HIDE XTD LIMITS, for fading out the XTD LIMITS only
− HIDE WPT LABELS for fading out the WPT LABELS only