User's Manual Part 2
Operator Manual
2−132
3748DOC020102 Edition: 14.JAN.2005
2.5.4 Select T−SCE (ON/OFF)
This function allows you to call up a TEST SCENARIO.
The test scenario is described by an independent radar video, in which the test
targets are displayed.
The radar video is identified by two flashing XX characters and is shown in the PPI.
Procedure: (see Figure: 2−76)
Step 1 Open the FUNCTION menu
Step 2 Set T−SCE ON
After several cycles, the test scenario appears in the PPI.
These targets can be acquired manually or using the ARPA zones. The
corresponding target information can be read out using the ARPA INFO.
T−SCE OFF hides the test scenario.