User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
4265.DOC020102
2-84
Edition July 2015
Operator controls
Task
Editing an INDEX LINE overlay.
The index lines can be edited by shifting their index points.
Step 1 Select the SELECT soft button for INDEX LINE.
Step 2 Select INDEX LINE overlay using trackball and
press right trackball button. The INDEX LINE display
changes and both points are shown. The EDIT function is
activated.
Step 3 Select the EDIT MARKER soft button The EDIT
INDEX LINE dialog window appears in the function
display.
Step 4 Select the point of interest using the trackball and
press the right trackball button. The current position is
shown in the EDIT INDEX LINE (bearing and distance)
display. Determine the new position and drop by pressing
the left trackball button.
Operator controls
Task
Deleting an INDEX LINE overlay.
Step 1 Select the SELECT soft button for INDEX LINE.
Step 2 Select INDEX LINE overlay using trackball and
press right trackball button. The INDEX LINE display
changes and all points are shown. The EDIT function is
activated.
Step 3 Select the DELETE soft button. The INDEX LINE is
deleted immediately.