User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
Edition July 2015
2-91
4265.DOC020102
2.3.4.1.(6) Map Menu – LOAD –
LOAD
LOAD allows the operator to load a saved MAP. The Radar system uses the
saved LATITUDE / LONGITUDE coordinates to identify the correlation between
the MAP and the sea area currently displayed on the PPI.
This function supports two MAP categories.
LOCAL MAP
Local MAPS are MAPS whose saved coordinates match the current sea area.
DISTANT MAP
Distant MAPS are MAPS created for a different sea area.
Operator controls
Task
Step 1 Select the MAP MENU soft button the menu
appears in the functions display.
Step 2 Select the LOAD MAP soft button the menu
appears in the functions display.
Step 3 Select LOCAL MAP or DISTANT MAP.
Step 4 Select the MAP of interest. A toggle field allows the
operator to scroll through the list. The first name in the list
reflects the desired MAP name.
Step 5 Pressing the LOAD soft button the MAP shows up
on the PPI. If necessary, select another range scale to find
the LOCAL MAP on the PPI. Possible corrections can be
made using the MAP MENU function CONTROL (chapter
2.3.4.1.(2)).