User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
Edition July 2015
2-111
4265.DOC020102
Operator controls
Task
Step 4 Select the SHOW HEAD WT or SHOW HEAD BT.
The VELOCITY VECTOR and stabilization indicator can
be used.
To SHOW or HIDE the own ship stabilization indicator
select a soft button. The Water Track (WT) indicator is
presented as a single arrowhead. The Bottom Track (BT)
indicator is presented as a double arrowhead.
CCRS (SET and DRIFT). These values are calculated by
CCRS.
Press the CCRS soft button.
The Set/Drift Sensor Select window appears in the
function display area. In MAN mode the values can be set
by the user.
To set MANUAL input, use the slider function inside the
numerical field.
SET indicates the drift angle in .
DRIFT indicates the drift speed in kn.
Position (POS). The type of sensor being used is indicated
on the button (e.g. GPS1 D).
Press the GPS1 soft button.
The Position Sensor Select window appears in the
function display area, showing the available position
sensors in this system.
In MAN mode the sensor can be selected by the user. If
no sensor is available a manual position value can be
entered.
To set MANUAL input, use the slider function inside the
numerical values and confirm with the SET button.