User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
4265.DOC020102
2-146
Edition July 2015
2.5.4 Set AIS Options
2.5.4.1 AIS Options
The Automatic Identification System (AIS) is designed for automatic and
autonomous data communication between ships. Transferred data include
(among others) information such as identification, status, position, speed,
course over ground (detailed information see AIS Manual).
All AIS targets can be displayed on the PPI, detailed information can be shown
on request at the target info display and alarms for LOST and DANGEROUS
AIS Targets will be generated automatically.
AIS targets can be filtered, ranges for display of AIS targets are selected
between 3 and 96 NM.
The AIS OPTIONS allows following AIS FILTER settings.
LOST TARGET ALARM ON (switchable ON/OFF)
OUTLINE SYMBOLS ON/OFF (switchable ON/OFF)
HIDE ATON & BASE STATIONS (switchable SHOW/HIDE)
Automatically acquisition (Automatic Activation) of dangerous, sleeping AIS
targets via CPA/TCPA zones
CPA/TCPA ALARM ON (switchable ON/OFF)
ACTIVATE AT CPA/TCPA OFF (switchable ON/OFF)
Manually acquisition of sleeping AIS targets
ACTIVATION RANGE (default 3NM)