User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
4265.DOC020102
2-148
Edition July 2015
Operator controls
Task
HIDE ATON & BASE STATIONS (switchable
SHOW/HIDE).
Aids to Navigation (ATON) (special buoys equipped with
an AIS unit) or Base Stations appear with following
symbols.
The selected mode displays as ATON ON or OFF
message on the display.
CPA/TCPA ALARM ON (switchable ON/OFF).
In this case the ACTIVATE AT CPA/TCPA changes to
OFF. Dangerous, sleeping AIS targets passing the
CPA/TCPA range generate automatically an Alarm
Message.
The AIS targets maintain the sleeping status.
ACTIVATE AT CPA/TCPA ON (ON/OFF).
In this case the CPA/TCPA ALARM changes to OFF.
Dangerous, sleeping AIS targets passing the CPA/TCPA
range will be activated and generate automatically an
Alarm Message.
The target symbol color changes to orange.
The target symbol flashes.
The target symbol becomes bigger.
The TARGET INFO displays the AIS information.
ACTIVATION RANGE (default 3NM).
Sleeping Targets passing this range change to active
status. The range scale can be adapted by the slider
function.
AIS OWN SHIP DATA.
Displays the own AIS SHIP DATA.
(virtuell)
(physical)