User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
4265.DOC020102
2-152
Edition July 2015
AIS Target
Symbol
Description of symbols
Heading lines
234566374 234566374
Heading lines shall be selected for
display for activated AIS targets
and associated targets,
represented by AIS target
symbols.
Heading lines shall originate at the
apex of the AIS triangle and shall
extend not less than 4 mm and at
least 4 mm beyond the bow of the
true scaled outline when it is used.
They shall be drawn using a solid
line style with the same basic color
as used for target symbols.
Heading lines for dangerous AIS
target shall flash with their base
symbol until acknowledged by the
user.
An activated target without a
reported heading shall be
orientated to the top of the
operational display area and when
AIS heading is enabled shall not
include a heading line.
Heading lines –
turn indicators
223345765 223345765
The user shall select to display
turn indicators for activated AIS
targets and associated targets
represented by AIS target
symbols.
Turn indicators shall be presented
as a single line extending at least
1 mm but not more than 2 mm
perpendicular to the heading line
in the direction of turn. The
indicator shall be drawn using a
thin solid line style with the same
basic color as used for their target
symbols.
Turn indicators for dangerous
targets shall be the required color
red (until no longer dangerous)
and shall flash with their symbol
until acknowledged by the user
.