User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
Edition July 2015
2-171
4265.DOC020102
• ACQUISITION ZONE POLYGON
This function allows the user to create a zone with an arbitrary shape.
Operator controls
Task
Step 1 Open the TGT menu.
Step 2 Open the CREATE ZONE menu.
Step 3 Open the ACQUISITION ZONE menu with the
options SECTOR, POLYGON, RING.
Step 4 Open the ACQUISITION ZONE POLYGON menu.
Step 5 Apply the values. Pressing the COMMIT button
activates the ACQUISITON ZONE POLYGON in
continuous line.
The BEARING values are relative to own ship.
Result:
A polygon with preset BEARING and RANGE values
appears on the Radar video.
The polygon can be individually adapted using the editing
marks (1....8).
The polygon method can be edited to any shape. The
default shape is shown in the PPI.
It must be ensured that the ACQUISITION ZONE AREA
includes the ship for the special polygon shape
ACQUISITION ZONE.
These changes can be made directly using the cursor
(drag and drop (chapter 2.1.4.1)) or using the text lines
with slider functions for BEARING and RANGE located in
the ACQUISITION ZONE POLYGON display field.