User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
4265.DOC020102
1-8
Edition July 2015
An operator should become familiar with the location of the display information
and the control panel buttons.
Manual overview:
Chapter 1 Important safety notes for the Radar System
Chapter 2 Operation and short operation
Chapter 3 Theory of operation
The Radar is designed in accordance with the rules of the International
Maritime Organization IMO*.
* The International Maritime Organization is the specialized agency of the
United Nations which is responsible for safety and security at sea and the
prevention of marine pollution from ships.
The Radar system supports the Categories of Ship according to CAT 1, CAT 2,
CAT3 and for the options High Speed Radar (for example CAT 1H) and Chart
Radar (for example CAT 1HC) depending on the used display size.
The main components of the Radar (Figure 1-1)
− the Flat Screen Display (TFT Technology)
− the trackball and the Radar Operator Panel or the Remote Panel
(option)
− the Radar Processor
− Ethernet switch and Serial to Ethernet converter
Radar operation
The Radar can be completely operated via the trackball controlled cursor.
The Radar Operator Panel is designed for the execution of certain Radar
functions.