User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
4265.DOC020102
2-80
Edition July 2015
(2) CREATE MAP, NAV LINE (ROUTE LINE)
NAV LINE and ROUTE LINE
Navigation and route lines can be displayed on the PPI.
The navigation lines can be plotted on the PPI as polygons in solid and /or
dotted line form.
The route lines can be plotted on the PPI using the polygon in the same way as
navigation lines. The route polygon is marked with typical route points between
the polygon lines. The polygon lines will be drawn in broken line form.
The coordinates (LAT/LON) of the polygon connecting points can be shown on
the display (EDIT NAV LINE) using the cursor.
Navigation lines and route lines are stored as latitude and
longitude values of the connecting points. Ensure that
correct positioning information is available before creating a
new map.
Cursor returns to park position.
If using the cursor is interrupted for a longer period the cursor is returned to
park position.
The NAV LINE operation is canceled. The previous NAV LINE remains on the
PPI but switches to SET status (connecting points are not displayed). If the
NAV LINE is to be extended or changed, this can be done immediately by
selecting it again or by using the EDIT function.