User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
Edition July 2015
2-193
4265.DOC020102
2.7.4 Select Zoom Menu
The ZOOM menu allows the operator to display a selected PPI area (zoom
frame) in a Zoom Window. If the operator selects the ZOOM Menu after
switching ON the Radar the zoom frame displays the default setting RELATIVE
TO OS (Own Ship). Other settings can be selected as described below.
Operator controls
Task
Step 1 Open the FUNC menu.
Step 2 Select the ZOOM button.
Step 3 The zoom frame appears on the display (default
setting RELATIVE TO OS). Use the trackball to find the
area of interest and press the right trackball button.
The frame color changes from ORANGE to WHITE.
Step 4 Using the Zoom In (+) or Zoom Out (-) function.
The Zoom menu provides following options as reference
points:
a geographical position
a constant distance and bearing to own ship
a tracked ARPA target
a tracked AIS target
Zoom Window with crosshair
press the EXIT soft button, the ZOOM window appears
again.
To leave the ZOOM function, select another soft button
e.g. FUNC.