User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
4265.DOC020102
2-224
Edition July 2015
ALARM MESSAGE
a) Problem Description
b) Corrective Action
CPA TCPA BY xx TARGET
(S)
(CLOSEST POINT OF
APPROACH or TIME TO
CLOSEST POINT OF
APPROACH)
a) ARPA/AIS Alarm.
Track will pass inside CPA limit.
b) Check the situation.
FAST ANTENNA
(FAST ANTENNA ALARM)
a) Antenna System is disturbed.
The antenna rotation is incorrect.
b) Start the Radar System again.
Refer to the maintenance section for
troubleshooting and repair.
Call Service.
FAILED TO OPEN CAN
PORT
a) Internal failure.
b) Start the Radar System again.
Call Service.
GUARD ZONE INTRUSION
BY xx TARGET (xx)
a) ARPA/AIS Alarm.
b) Tracks already acquired have moved
into an area under watch.
c) See chapter 2.6.1.
NO ACP/APR
(ACP Azimuth Commit Point)
(APR Azimuth Reset Point)
a) The radar transceiver has detected that
azimuth commit point (ACP) or azimuth
reset pulses (ARP) are missing. This
prevents correct alignment of the
antenna.
b) Refer to the maintenance section for
troubleshooting and repair.
Call Service