User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
Edition July 2015
2-229
4265.DOC020102
WARING MESSAGE
a) Problem Description
b) Corrective Action
LOST REFERENCE
TARGET
a) The Radar System lost the tracked fixed
target (Reference Target).
b) Check the situation and look for a new
suitable fixed target (buoy, lighthouse),
(chapter 2.5.2.6).
LOST ARPA TARGET
a) The Radar System lost the ARPA Target
b) Check the situation, check the
Acquisition zone (chapter 2.6)
LOST AIS TARGET
a) The Radar System lost the AIS Target.
b) Check the situation, the AIS Target is
outside the received area.
MAX AUTO ARPA
TARGETS
a) The Radar automatically acquires more
than 40 targets.
b) Check the situation, check the
Acquisition zone (chapter 2.6)
MAX MAN ARPA TARGETS
a) The Radar manually acquires more than
40 targets.
b) Check the situation, delete innocuous
targets.
Xx NEW ARPA TARGET(S)
a) The Radar automatically acquires a new
target.
b) Check the situation.
NEW AIS TARGET
a) The AIS transponder acquires a new AIS
target.
b) Check the situation.
FIX ACTIVE: MAP
a) Manual MAP Offset