User's Manual
Table Of Contents
- 0 General
- 1 BASIS SETTINGS TO USE THIS RADAR
- 2 OPERATING INSTRUCTION
- 2.1 Radar Operation
- 2.2 Set to Operation
- 2.3 Display Organization and Submenu Structure
- 2.3.1 Sensitivity Controls
- 2.3.1.1 Gain and Clutter Processing
- 2.3.1.2 Tune
- 2.3.1.3 Gain
- 2.3.1.4 Sea
- 2.3.1.5 Rain Rate
- 2.3.1.6 Automatic Clutter Reduction
- 2.3.1.7 Filtering Rain Clouds FTC
- 2.3.1.8 Search and Rescue Transponder SART ON/OFF
- 2.3.1.9 Pulse Width Selection (only available in Master mode)
- 2.3.1.10 Interference Selection IR ON/OFF
- 2.3.1.11 Echo Expansion EXP. ON/OFF
- 2.3.2 Radar Video Displays
- 2.3.3 Radar Video Settings
- 2.3.4 Navigational Elements MAP, PIL, EBL and VRM
- 2.3.5 Cursor Information
- 2.3.6 Cursor in Park Position
- 2.3.7 Information Panel
- 2.3.1 Sensitivity Controls
- 2.4 Select Target Information TGT INFO
- 2.5 Target Menu
- 2.6 Zone Management
- 2.7 Function Menu
- 2.7.1 Select the Backlight Menu Brightness Control and Color Palette
- 2.7.2 Select T-SCE (ON/OFF)
- 2.7.3 Select Route (Option)
- 2.7.4 Select Zoom Menu
- 2.7.5 Select Sector Blanking (ON/OFF)
- 2.7.6 System Clear
- 2.7.7 Performance Monitor (PMU)
- 2.7.8 Magnetron Current
- 2.7.9 Test Alert
- 2.7.10 Senc Menu
- 2.7.11 Chart Info
- 2.8 Chart Radar Function
- 2.9 Select ARPA Trial Manoeuvre
- 2.10 Sea Scout (Option)
- 2.11 Alarm and Warning messages and handling
- 2.12 Working Around the Radar Antenna
- 3 Theory of Operation
- 4 Index
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
4265.DOC020102
2-8
Edition July 2015
2.1.4 Operator Controls on the Radar Display and Soft Button
2.1.4.1 Operator Controls on the Radar Display
To operate the Radar display, you need to use certain built-in operator controls.
Table 2-2 Operator Controls on the Radar Display
Operator controls
Text identifier
Soft Button.
The text on the soft button always describes the
currently mode status.
Example:
STBY means that the Radar is in Standby mode.
Clicking on the soft button changes the status in this
case to TX. TX means that the Radar is in the Transmit
mode.
A selected soft button is distinguished from a non-
selected soft button by its thick contours.
Toggle fields.
The toggle field functionalities are activate up by
pressing the left trackball button or alternatively
(partially) using the buttons on the Operator Panel.
Toggle fields are used to increase or decrease values or
used to switch over to another mode e.g. N UP to H UP
or used to scroll through the alarm messages.
Toggle field with slider.
Position the cursor on the toggle field, press and hold the
left trackball button until the slider symbol appears
(scroll bar) below the toggle field.
The slider can be moved into the aimed direction using
the trackball.
In parallel, the numerical value above the slider changes.
Press the left button again to complete the setting or
wait for the time out.