Operation Manual

6 | For gamers by gamers™
5. USING YOUR RAZER ADARO IN-EAR ANALOG EARPHONES
ACHIEVING A PROPER SEAL
To enjoy the full-bodied bass of the Razer Adaro In-Ear Analog Earphones as it is
intended, please ensure that the earphones are properly fitted into your ears and
that a proper seal is achieved to block out ambient noise.
REMOVING YOUR RAZER ADARO IN-EAR ANALOG EARPHONES
CAUTION: Do not yank out earphones from your ears as the sudden release of air
pressure might cause potential discomfort.
EAR-TIP SIZES
Due to the different ear canal sizes of individuals, the default ear-tips may not
achieve a proper seal. Interchanging the ear-tips to a larger/smaller size will improve
performance.
REMOVING THE EAR-TIPS
1. Firmly hold the neck of the earphone.
2. Grip the opening of the ear-tip firmly with
the other hand.
3. Pull ear-tip downwards gently until it is
released from tip of the earphones.
REPLACING THE EAR-TIPS
1. Firmly hold the neck of the earphone.
2. Push mouth of the ear-tip onto tip of the
earphone.
3. As you apply pressure, use a gentle
twisting motion until ear-tip is secured and in
place.