Operation Manual

7 | razer
PAIRING YOUR HEADPHONES TO A BLUETOOTH® DEVICE
1. Upon powering on, the LED should be flashing blue and red alternatively. This
indicates that the headphone is now in pairing mode.
2. Activate Bluetooth® on your device and search for new Bluetooth® devices.
3. Select “Razer Adaro Wireless” from the list of Bluetooth® devices found.
4. Wait for the pairing to complete. Your headphone LED will flash blue 5 times and
you should hear 1 short beep.
Note: The pairing attempt will be stopped if no connection can be established after 2 minutes. 4
short beeps will be played indicating the connection failure.