Arcade gaming has come a long way since its glory days – an era woven into the fabric of gaming history as one that paved the way for innovation, and also one that brought us bittersweet nostalgia. Hours spent at the arcade honed the gamer in you; for every coin you inserted, every combo you executed, every hit you took, and every ultra you unleashed in return – you became a better player. And this is the approach we took when designing the Razer Atrox Arcade Stick.
TABLE OF CONTENTS 1. PACKAGE CONTENTS / SYSTEM REQUIREMENTS ...................................... 3 2. REGISTRATION / TECHNICAL SUPPORT ..................................................... 4 3. DEVICE LAYOUT ........................................................................................ 5 4. SETTING UP YOUR RAZER ATROX ............................................................. 7 5. CUSTOMIZING YOUR RAZER ATROX ....................................................... 11 6.
1. PACKAGE CONTENTS / SYSTEM REQUIREMENTS PACKAGE CONTENTS Razer Atrox Arcade Stick 13 ft.
2. REGISTRATION / TECHNICAL SUPPORT REGISTRATION Please visit www.razerzone.com/registration for online product registration. Your Product’s serial number can be found here TECHNICAL SUPPORT What you’ll get: 1 year limited manufacturer’s warranty. Access to manual and free online technical support at www.razersupport.com.
3. DEVICE LAYOUT A. B. C. D. E. F. G. H. Ball Top Grip Authentic Sanwa Denshi™ Joystick Authentic Sanwa Denshi™ Action Buttons Removable Top Panel Compartment Button 2.
I. J. K. L. Control Stick Switch Lock / Unlock Switch Turbo Mode Buttons Xbox Guide Button M. 13 ft. Detachable Cable + Breakaway Cable N. Magnetized Flat Tip and Cross Tip Screwdriver O. Bat Top Grip SAFETY STATEMENT IMPORTANT! Before using the Xbox 360® with this product, read the Xbox 360® instruction manual for safety, health, and other information regarding the use of the Xbox 360®.
4. SETTING UP YOUR RAZER ATROX 1. Press the Compartment Button to unlock the lid. 2. Lift the lid to access the multipurpose compartment.
3. Take out the Detachable Cable with the attached Breakaway Cable. 4. To close and lock the lid, place both hands on the edge of the lid, and push down.
5. Connect your Xbox 360® Headset* to the 2.5mm Headset Port. (Optional) 6. Ensure that the marking is facing up when inserting the cable.
7. Connect the Detachable Cable to the back of your Razer Atrox. To remove the Detachable Cable, hold the cable grip firmly, and then pull.
5. CUSTOMIZING YOUR RAZER ATROX CAUTION! Please remove the Detachable Cable before opening the multipurpose compartment or doing any modifications to your Razer Atrox. CHANGING THE JOYSTICK GRIP 1. Press the Compartment Button to unlock the lid. 2. Lift the lid to access the multipurpose compartment.
3. Take the screwdriver and hold its flat tip firmly into the joystick’s screw. 4. Rotate the Ball Top Grip until it is removed from the joystick shaft.
5. Remove the shaft cover from the joystick shaft. 6. Rotate the Bat Top Grip onto the joystick shaft until it is securely fastened.
7. Place the Ball Top Grip inside the compartment and close the lid.
CHANGING THE ACTION BUTTONS 1. Press the Compartment Button to unlock the lid. 2. Lift the lid to access the multipurpose compartment.
3. Carefully remove the cables from the action button. 4. While holding the action button’s fastener, push the action button out.
5. Repeat steps 3 and 4 for all the buttons you want to change. 6. Insert your desired action buttons or the button covers* into the slots.
7. Reattach the cables to the action buttons. 8. Ensure that all the cables are properly connected then close the lid.
CHANGING THE TOP PANEL ARTWORK 1. Press the Compartment Button to unlock the lid. 2. Lift the lid to access the multipurpose compartment.
3. Take the screwdriver and hold its flat tip firmly into the joystick’s screw. 4. Rotate the Ball Top Grip until it is removed from the joystick shaft.
5. Remove the shaft cover and dust washer from the joystick shaft. 6. Carefully remove the cables from the action button.
7. While holding the action button’s fastener, push the action button out. 8. Repeat steps 6 and 7 until all the action buttons are removed.
9. Place your finger on the metal stopper then remove the screw using the cross tip. 10. Repeat step 9 until all screws and metal stoppers are removed.
11. Gently remove the top panel and artwork from the lid. 12. Close and lock the lid.
13. Place your custom artwork design* on top of the lid and ensure that is aligned. *The die-cut pattern is available for download at www.razerzone.com/atrox/template. 14. Return the top panel onto the lid and ensure that it is properly aligned.
15. Reinsert the action buttons into their respective slots. 16. Press the compartment button then gently lift the lid.
17. Screw the metal stoppers into the lid until all 6 holes are covered. 18. Reinsert the dust washer, shaft cover, and joystick grip to the joystick shaft.
19. Reattach the cables to the action button. 20. Ensure that all the cables are properly connected then close the lid.
6. USING YOUR RAZER ATROX Control Stick Switch The Control Stick Switch allows you to change the functionality of the joystick to emulate the Left Analog Stick, Right Analog Stick or Directional Pad of the standard controller. Note: To navigate the Xbox 360 Dashboard, set the Control Stick Switch to Directional Pad (DP). Lock / Unlock Switch Setting this switch to Lock ( ) will disable the Start, Back, Xbox Guide and Turbo Buttons. However, all previously assigned turbo functions will remain active.
Turbo Buttons The Turbo Buttons allow you to hold down a button instead of tapping that button repeatedly. There are 2 levels of turbo: Turbo 1: To activate Turbo 1, press the turbo button once. The turbo button will have a steady light to indicate that turbo 1 is activated. When held down, the corresponding action button will perform an action four times (4x) every second. Turbo 2: To activate Turbo 2, press the turbo button twice. The turbo button will blink to indicate that turbo 2 is activated.
REASSIGNING THE TURBO BUTTONS 1. Press and hold Turbo Button 1, Turbo Button 8 and the Start button. 2. Upon activation, Turbo Button 1 will start to blink. 3. While the turbo button is blinking, you can either: Press the action button you wish to assign. OR Press Start to skip the button assignment.
4. The turbo button will be lit if assigned to an action button or unlit if skipped. 5. Once a turbo button has been assigned, the next turbo button will blink. 6. Repeat step 3 until all the turbo buttons have been assigned or skipped. 7. Once done, the turbo buttons will blink twice and you can continue gaming.
7. SAFETY AND MAINTENANCE SAFETY GUIDELINES In order to achieve maximum safety while using your Razer Atrox, we suggest that you adopt the following guidelines: 1. Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to www.razersupport.com for support. Do not attempt to service or fix the device yourself at any time. 3.
5. Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming. 6. Do not sit in the same position all day. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck and legs. 7. If you should experience any physical discomfort while using your Razer Atrox, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck or back, please consult a qualified medical doctor immediately.
8. LEGALESE COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION © 2013 Razer Inc. All rights reserved. Razer, For Gamers By Gamers, and the tripleheaded snake logo are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. All other trademarks are the property of their respective owners. Actual product may differ from pictures. Information is correct at time of printing. Razer Inc.
COSTS OF PROCUREMENT For the avoidance of doubt, in no event will Razer be liable for any costs of procurement unless it has been advised of the possibility of such damages, and in no case shall Razer be liable for any costs of procurement liability exceeding the retail purchase price of the Product. GENERAL These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased.