Congratulations on purchasing your very own Razer DeathAdder, which inherits the same death-dealing edge as the revolutionary Razer Boomslang and the Razer Mamba. With all our gamers in mind, the Razer team of specialized engineers presents this perfect right-handed weapon with superb ergonomics and performance for you to strike the killing blow.
TABLE OF CONTENTS 1. PACKAGE CONTENTS / SYSTEM REQUIREMENTS ................................................ 3 2. REGISTRATION / TECHNICAL SUPPORT ............................................................... 3 3. TECHNICAL SPECIFICATIONS ............................................................................... 4 4. DEVICE LAYOUT .................................................................................................. 5 5. INSTALLING YOUR RAZER DEATHADDER....................................
1. PACKAGE CONTENTS / SYSTEM REQUIREMENTS PACKAGE CONTENTS Razer DeathAdder Gaming Mouse Quick Start Guide Master Guide SYSTEM REQUIREMENTS PC or Mac with a free USB port Windows® 7 / Windows Vista® / Windows® XP (32-bit) / Mac OS X (10.6-10.7) Internet connection 100MB of free hard disk space 2. REGISTRATION / TECHNICAL SUPPORT REGISTRATION Please visit www.razerzone.com/registration/ for online product registration.
3. TECHNICAL SPECIFICATIONS 3500dpi Razer Precision 3.5G infrared sensor Ergonomic Right-Handed Design 1000hz Ultrapolling / 1ms Response Five Independently Programmable Hyperesponse Buttons Always-On Mode Ultra-large Non-Slip Buttons 16-Bit Ultra-Wide Data Path 60–120 Inches Per Second And 15g Of Acceleration Gold-Plated USB Connector Seven-Foot, Lightweight, Braided Fiber Cable Razer Synapse 2.0 Enabled Approximate Size : 127 mm / 5.00” (Length) x 70 mm / 2.76” (Width) x 44 mm / 1.
4. DEVICE LAYOUT A. B. C. D. E. F. G. H. Left Mouse Button Right Mouse Button Scroll Wheel Mouse Button 5 Mouse Button 4 Razer Precision 3.
5. INSTALLING YOUR RAZER DEATHADDER Step 1: Download the Razer Synapse 2.0 installer from http://www.razersupport.com Step 2: Run the installer and follow the onscreen instructions. Step 3: Register for a Razer Synapse 2.0 account and confirm your new account. Step 4: Plug the Razer DeathAdder into the USB port of your computer. Step 5: Open Razer Synapse 2.0 and login to your account. Step 6: Wait until the software automatically downloads and installs.
6. CONFIGURING YOUR RAZER DEATHADDER Disclaimer: The features listed here require you to log in to Razer Synapse 2.0. These features are also subject to change based on the current software version and your Operating System. MOUSE TAB The Mouse Tab is your default tab when you first install Razer Synapse 2.0. This tab allows you to customize your device’s profiles, button assignments, performance and lighting.
PROFILE A Profile is a convenient way of saving all of the changes you have made on your device. A single Profile can store numerous settings such as button assignments and sensitivity adjustments. Profile contains the default settings of your device. Any changes made within each tab will automatically be saved into the current profile. If you want to rename this profile, you may do so by typing on the field below PROFILE NAME.
CUSTOMIZE TAB The Customize Tab is where you can modify the basic functionalities of your device such as button assignments to suit your gaming needs. The changes made in this tab are automatically saved to your current profile. This tab is where you can customize the 5 basic mouse buttons and the mouse wheel. This tab also allows you to switch if you have the Razer DeathAdder Left-Hand Edition.
BUTTON ASSIGNMENT MENU Initially, each of the mouse buttons is set to DEFAULT. However, you may change the function of these buttons by clicking the desired button to access the BUTTON ASSIGNMENT Menu. Listed below are the customization options and their descriptions. Default This option enables you to return the key to its original function. To choose the DEFAULT, simple select it from the BUTTON ASSIGNMENT Menu.
Mouse Function This option allows you to change the mouse buttons into other mouse functions. To choose a mouse function, select MOUSE FUNCTION from the BUTTON ASSIGNMENT Menu and an ASSIGN BUTTON submenu will appear. Listed below are the functions which you can choose from the Assign Button submenu: Left Click Right Click Scroll Click Double Click Mouse Button 4 Mouse Button 5 Scroll Up Scroll Down - Performs a left mouse click using the assigned button.
Macro A Macro is a prerecorded sequence of keystrokes and button presses that is executed with precise timing. By assigning a Macro to a button, you can execute complex combinations with ease. The ASSIGN MACRO allows you to choose which recorded Macro to use while the PLAYBACK OPTION enables you to choose the behavior of the Macro. See the MACROS TAB to learn more about creating Macro commands.
PERFORMANCE TAB The Performance Tab allows you to enhance the speed and precision of your mouse pointer. Similar to the Customize Tab, the changes made here are automatically saved to your current profile. Listed below are the performance options and their descriptions. Sensitivity Sensitivity pertains to how much effort is needed to move the mouse pointer in any direction. The higher the sensitivity, the more responsive the mouse will be.
Enable X-Y Sensitivity By default, the X-axis (horizontal) and Y-axis (vertical) use the same sensitivity values. However, you may set different sensitivity values to each of the axes by selecting the ENABLE X-Y SENSITIVITY option. Configure Sensitivity Stages A sensitivity stage is a preset sensitivity value. You can create up to 4 different sensitivity stages which you can cycle through using the sensitivity stage up/down buttons. You may use the ENABLE X-Y SENSITIVITY concurrently with this option.
LIGHTING TAB The Lighting Tab allows you to configure the LEDs of your Razer DeathAdder. Simply toggle the ON or OFF options to enable or disable the Scroll Wheel and Logo lighting. Similar to the previous tabs, the changes made here are also automatically saved to your current profile.
MACROS TAB The Macros Tab allows you to create a series of precise keystrokes and button presses. This tab also allows you to have numerous macros and extremely long macro commands at your disposal. The Macro section works similarly to Profile wherein you can rename a macro by typing on the field below MACRO NAME. There are also other options available in the macro section such as creating a new macro by clicking the current macro by clicking the clicking the button.
To create a macro command, simply click the button and all your keystrokes and button presses will automatically register on the macro screen. When you are done recording your macro commands, click on the the session. button to end The Macro section allows you to input the delay in-between commands. In RECORD DELAY the delay in-between commands are registered as how it is entered. The DEFAULT DELAY uses a predefined time (expressed in seconds) as the delay.
Once you have recorded a macro, you may edit the commands you have entered by selecting each command on the macro screen. Each keystroke or button press is arranged sequentially with the first command shown at the top of the screen. The button allows you to edit a particular command and the enables you to delete a command. The option to move the command up or down.
Once you have pressed the button, a new display window will appear beside the list of macro commands. The dropdown menu on this window allows you to choose a keystroke or a delay to be added in before or after the highlighted macro command.
You may add in a new set of macro commands by clicking the button on the keystroke menu; or input time delays on the duration field using the delay menu.
7. SAFETY AND MAINTENANCE SAFETY GUIDELINES In order to achieve maximum safety while using your Razer DeathAdder, we suggest that you adopt the following guidelines: 1. Avoid looking directly at the tracking beam of your mouse or pointing the beam in anyone else’s eye. Note that the tracking beam is NOT visible to the naked human eye and is set on an Always-On mode. 2.
1. Position your keyboard and monitor directly in front of you with your mouse next to it. Place your elbows next to your side, not too far away and your mouse within easy reach. 2. Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow height. 3. Keep your feet well supported, posture straight and your shoulders relaxed. 4. During gameplay, relax your wrist and keep it straight.
8. LEGALESE COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION ©2006-2012 Razer USA Ltd. Patent Pending. All Rights Reserved. Razer, the Razer Triple-Headed Snake logo, the Razer distressed word logo and other trademarks contained herein are trademarks or registered trademarks of Razer USA Ltd and/or its affiliated or associated companies, registered in the United States and/or other countries. Windows and the Windows logo are trademarks of the Microsoft group of companies.
COSTS OF PROCUREMENT For the avoidance of doubt, in no event will Razer be liable for any costs of procurement unless it has been advised of the possibility of such damages, and in no case shall Razer be liable for any costs of procurement liability exceeding the retail purchase price of the Product. GENERAL These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased.