Owner's Manual

Sensitivity
Sensitivity pertains to how much effort is needed to move the mouse pointer in any
direction. The higher the sensitivity, the more responsive the mouse will be.
(Recommended setting: 1600 – 1800 DPI)
Enable X-Y Sensitivity
By default, the X axis (horizontal) and Y axis (vertical) use the same sensitivity
values. However, you may set different sensitivity values to each of the axes by
selecting the “Enable X-Y Sensitivity” option.
Configure Sensitivity Stages
A sensitivity stage is a preset sensitivity value. You can create up to 5 different
sensitivity stages which you can cycle through using the sensitivity stage up/down
buttons.
Acceleration
Acceleration increases the cursor’s movement speed depending on how quickly you
move the mouse. The higher the value, the faster the mouse accelerates.
(Recommended settings: Windows 0, Mac 5)
Polling Rate
The higher the polling rate, the more often the computer receives information
about the status of your mouse, thus increasing the mouse pointer’s reaction time.
You can switch between 125Hz (8ms), 500Hz (2ms) and 1000Hz (1ms) by selecting
your desired polling rate on the dropdown menu. (Recommended setting: 500Hz –
1000Hz)