User's Manual

6 _)RUJDPHUVE\JDPHUV

USINGTHEAUDIOVOLUMECONTROL

Audiovolumeup
Audiovolumedown
[PLACEHOLDERIMAGE]
Youwillhearashortbeepwhenyoureachtheminimumormaximumvolume.

Presstheaudiovolumecontrollocatedatthebottomoftheheadsettomute/unmute
theaudio.
[PLACEHOLDERIMAGE]

USINGTHEWIRELESSUSB
TRANSCIEVER
The wireless USB transceiver is located at the bottom of the headset. Push in the
wirelessUSBtransceiveruntilyou hear aclickthenreleaseyourfingersothat itejects
from the headset. To return the wireless USB transceiver, simply do these steps in
reverseorder.

[PLACEHOLDERIMAGE]


Note:IfyouareusingtheRazerManO’Warheadsetforthefirsttime,youmayberequiredtosetthe
deviceasyoursystem’sdefaultplaybackdevice.

ForWindowsusers
Step 1: Connect the wireless USB transceiver to the USB port of your device and
powerontheheadse t.
[PLACEHOLDERIMAGE]

Step2:WaituntiltheheadsetLED islitgreen.This indicatesthattheheadsetispaired
withthewirelessUSBtransceiver.
[PLACEHOLDERIMAGE]
Note:Thepairingattemptwill bestoppedifnoconnectioncan beestablishedafter30seconds.Your
headsetwillflashredand4shortbeepswillbeplayedindicatingtheconnectionfailure.

Step 3: Open your Sound settings from Control Panel  > Hardware and Sound >
Manageaudiodevices.Youcanalsoright‐clickyoursoundicononthesystemtrayand
selectPlaybackdevices.
