RAZER MASTER GUIDE
The is a streamer certified pro-grade dynamic streaming microphone designed to take the quality of your stream to the next level. It produces a warm and rich vocal quality, further enhanced by the addition of a high-pass filter and a digital/analog limiter that produces exceptionally clean audio. F O R GA M E RS . BY GA M E RS .
CONTENTS 1. PACKAGE CONTENTS / SYSTEM REQUIREMENTS ....................................................................................... 3 2. REGISTRATION / TECHNICAL SUPPORT.......................................................................................................... 4 3. TECHNICAL SPECIFICATIONS.............................................................................................................................. 5 4. DEVICE LAYOUT .....................................................
1. PACKAGE CONTENTS / SYSTEM REQUIREMENTS PACKAGE CONTENTS ▪ Razer ▪ Desk stand ▪ Micro-USB to USB cable ▪ Microphone windscreen ▪ Important Product Information Guide Elite professional grade dynamic streaming microphone SYSTEM REQUIREMENTS ▪ PC or Mac with a free USB port ▪ Windows® 7 64-bit / OS X® 10.8 (or higher) ▪ Internet connection ▪ Third party software: Open Broadcaster Software [obsproject.com] or XSplit* [xsplit.com] *Software license fee may apply. F O R GA M E RS .
2. REGISTRATION / TECHNICAL SUPPORT REGISTRATION Register your product online at razer-id.razerzone.com/warranty using your Razer ID to get real- razer-id.razerzone.com to get a wide range of Razer benefits. serial number can be found here. TECHNICAL SUPPORT ▪ ▪ Free online technical support at support.razerzone.com F O R GA M E RS . BY GA M E RS .
3. TECHNICAL SPECIFICATIONS MICROPHONE SPECIFICATIONS ▪ Sample Rate: min 44.1kHz / max 48kHz ▪ Bit Rate: 16bit ▪ Capsule: Single Dynamic Capsule ▪ Polar patterns: Cardioid ▪ Frequency response: 50Hz-20kHz ▪ Connectivity: USB only ▪ Max SPL: 120dB HEADPHONE AMPLIFIER ▪ Ω ▪ Power output (RMS): 85mW (at 16 Ω) ▪ Flat Frequency Response: Yes ▪ Zero-Latency Monitoring: Yes APPROXIMATE SIZE & WIDTH ▪ Diameter: 60.2 mm / 2.40 in ▪ Height: 224.6 mm / 8.84 in ▪ Weight: 785 g / 1.
4. DEVICE LAYOUT A. Peaking indicator G. High-pass filter button B. Headphone volume control H. 3.5 mm headphone port C. Microphone gain control I. D. Microphone mute button J. Micro-USB to USB cable Microphone windscreen E. Desk stand with adjustable knobs F. Micro-USB port F O R GA M E RS . BY GA M E RS .
5. SETTING UP YOUR RAZER 1. Loosen the desktop mounting knobs and adjust the microphone angle so that the top portion of the microphone is facing the sound source. You may then tighten the knobs until the microphone is secured in place. 2. Connect the Razer to your computer using the Micro-USB to USB cable. Note: You may connect an analog audio output device (such as a headphone) to the 3.5 mm headphone port, to listen to the audio being recorded by your Razer at the same time. F O R GA M E RS .
3. Elite as the default playback and recording device of your computer. Elite for the first time. A. For Windows users Step 1: Open your Sound settings from Control Panel > Hardware and Sound > Manage audio devices. You can also right-click on the sound icon in the system tray, and then select Playback devices. Step 2: In the Playback tab, select button. F O R GA M E RS . BY GA M E RS .
Step 3: In the Recording tab, select button. from the list and click the Set Default B. For Mac users Step 1: Open your Sound settings from System Preferences > Sound. Step 2: In the Input tab, select F O R GA M E RS . BY GA M E RS . from the list.
Step 3: In the Output tab, select from the list. Congratulations, you are now ready to use your Elite. F O R GA M E RS . BY GA M E RS .
6. USING YOUR RAZER ADJUSTING THE HEADPHONE VOLUME Rotate the headphone volume control clockwise or counterclockwise to increase or decrease the headphone volume. Increase headphone volume Decrease headphone volume ADJUSTING THE MICROPHONE GAIN Rotate the microphone gain control clockwise or counterclockwise to increase or decrease the sensitivity of the microphone when capturing sound. This is recommended if the microphone is capturing too much ambient noise and vice versa.
MUTING THE MICROPHONE Press the microphone mute button to mute or unmute the microphone. The microphone mute LED will light up in red when the microphone is muted. Muted Enabled UNDERSTANDING THE PEAKING INDICATOR limiter adjusted the volume of the captured sound to prevent unwanted audio distortions and voice clipping. Note: You may disable or enable the Peaking indicator by pressing and holding the Microphone mute button for at least 6 seconds.
ENABLING / DISABLING THE HIGH-PASS FILTER Press the high-pass filter button to enable or disable the high-pass filter function of your Razer . By enabling the high-pass filter function, low-end rumbles and hums, such as wind noise from the air conditioning systems and cars driving by in a distance, are automatically filtered out without requiring post-recording edits. High-pass filter enabled F O R GA M E RS . BY GA M E RS .
7. SAFETY AND MAINTENANCE SAFETY GUIDELINES In order to achieve maximum safety while using the Razer the following guidelines: , we suggest that you adopt Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razerzone.com for support. Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
8. LEGALESE COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION ©2018 Razer Inc. All rights reserved. Razer, the triplePowered by Razer Chroma logo are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. Windows and the Windows logo are trademarks or registered trademarks of the Microsoft group of companies. OS X, Mac and the Mac logo are trademarks or registered trademarks of Apple.
COSTS OF PROCUREMENT For the avoidance of doubt, in no event will Razer be liable for any costs of procurement unless it has been advised of the possibility of such damages, and in no case shall Razer be liable for any costs of procurement liability exceeding the retail purchase price of the Product. GENERAL These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased.