Owner's manual

Removecontentsfrombox.Inspectthecontentsoftheboxforscratchesinthepaintand/ordentsthatmayhave
occurred during shipping. Because your scooter was assembled and packed at the factory, there should not be any
problems,eveniftheboxhasafewscarsordents.
BEFORE YOU BEGIN
2
WARNING: DO
NOT USE NON-RAZOR
PRODUCTS WITH YOUR
SCOOTER.
Razor scooters have been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible and will
void the warranty.
q Required Tools
Need Help? Visit our website for replacement parts, product support and a list of authorized service
centers at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific
Time.
5mm
Allen wrench
Grip
Handlebar
Steering tube quick-release
Steering tube/steering column
Joint lever/pivoting mechanism
Rear fender/brake
T-tube
Collar clamp
Front fork
Wheels
Deck
Steering column adjusting screw
2 With the front wheel pointed
straight ahead and the handle-
bars square to the front wheel,
tighten the clamp as shown.
Tighten securely.
ASSEMBLY INSTRUCTIONS (A4 ONLY)
1 Loosen the collar clamp and
slide it upward. With a clock-wise
twisting motion, push and “thread”
the steering tube onto the fork until
it bottoms out on the fork headset
lock nut.
WARNING: Failure to
properly install and tighten the
collar clamp may cause the rider to
lose control and fall. If you do not
understand these instructions or
the concept of “tighten securely”
seek the assistance of a qualified
mechanic.