User Manual

2
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Remove contents from box. Inspect the contents of the box for scratches in the paint and/or dents that may have
occurred during shipping. Because your scooter was partially assembled and packed at the factory, there should not be
any problems, even if the box has a few scars or dents.
BEFORE YOU BEGIN
WARNING: DO NOT USE
NON-RAZOR PRODUCTS WITH
YOUR SCOOTER. Razor scooters
have been built to certain Razor
design specifications. The
original equipment supplied at
the time of sale was selected
on the basis of its compatibility
with the frame, fork and all
other parts. Certain aftermarket
products may not be compatible
and will void the warranty.
Required Tools
5 mm
Allen wrench
Grips
T-bar
Battery Compartment
LED Light Button
1
Collar Clamp
Product ID Locations:
See locations to the left
1. Deck (Underneath Unit)
2. Box - Side of UPC (Not Shown)
Box Contents:
• Scooter
• Allen Wrench
• Owner’s Manual