™ SCOOTER Owner’s Manual Read and understand this entire manual before allowing child to use this product! For assistance contact Razor. DO NOT RETURN TO STORE. NOTE: Manual illustrations are for demonstration purposes only. Illustrations may not reflect exact appearance of actual product. Specifications subject to change without notice.
Contents Safety Warnings............................................................. 1 Before You Begin............................................................ 2 Set Up and Usage Instructions.................................... 3-4 Check Before Riding....................................................... 5 Scooter Parts List........................................................... 6 Safety Tips...................................................................... 7 Warranty.........................
Before You Begin Remove contents from box. Inspect the contents of the box for scratches in the paint and/or dents that may have occurred during shipping. Because your scooter was assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents. Grip WARNING: DO NOT USE NON-RAZOR PRODUCTS WITH YOUR SCOOTER. Razor scooters have been built to certain Razor design specifications.
Set up and usage instructions q Unfolding the scooter for first time use. 1 Insert and secure the left and right handlebars by pressing the spring-loaded buttons and inserting them into the T-bar. 2 Make certain BOTH handlebars are properly locked onto the T-bar. 3 To release the folding mechanism, put one foot on the deck plate and push joint release lever down. Raise handlebars up until securely locked in the upright position.
Set up and usage instructions q Installing your chalk WARNING: Keep fingers clear of chalk bar hinge and fender brake. NOTE: Chalk is non-toxic. Conforms to ASTM4236. Chalk washes off with water for easy clean-up. 1 Insert the tapered end of the chalk into the spring. 2 Twist chalk clockwise 1/4 turn until chalk is set securely in the spring. Periodically turn chalk as needed. q How to Ride Place one foot on the baseboard, push forward with the other foot. Steer.
Check before riding q Collar Clamp Using a 5mm Allen key, check that the collar clamp bolt is tightened securely. This part is tightened and quality inspected at the factory but there is a slight chance that the effects of shipping or handling may have caused this bolt to become loose. q Wheels and Bearings Under normal circumstances and conditions, Razor wheels and bearings are maintenance free.
Scooter Parts List Keep your scooter running for years with genuine Razor parts. Visit our web site or e-mail us for more information on spare part availability. (Specifications subject to change without notice.) 1. Foam Grips 12. 98mm Wheels 2. Handlebar 13. Coupling Axle Screw 3. T-Bar 14. Deck Insert (front) 4. Quick-Relese Lever 15. Reinforce Plate 5. Extension Tube 16. Joint Release Lever 6. Collar Clamp 17. Folding Base 7. Headset 18. Folding Protector 8. 19.
Safety reminders PRE-RIDE CHECKLIST q Loose Parts q q Replacement Parts q Check and secure all fasteners before every ride. Make sure the collar clamp, quick release lever, and handlebar spring buttons are locked properly in place before riding. Replace worn or broken parts immediately. Call 1-866-GO-RAZOR for parts. Be Careful! You will see people on TV and maybe even people you know doing tricks and stunts. These are people who have been practicing on scooters for a very long time.
