Owner's manual

4
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the
product I.D. code (located on the bottom of the frame) available for better assistance.
ASSEMBLY AND SET-UP
1 Using (2) 5mm Allen wrenches,
remove the (4) coupling bolts from
the frame.
2 Align the (4) holes in seat
with the (4) holes in frame. Insert
coupling bolts through the top and
bottom of the frame.
q Attaching the Seat
Required Tools: (2) 5mm Allen wrench
3 Tighten the coupling bolts using
(2) 5mm Allen wrenches.
q Attaching the Front Wheel
Required Tools: 5mm Allen wrench and 10mm wrench
1 Remove the (4) coupling bolts
from the front fork with a 5mm Allen
wrench and 10mm wrench.
2 Insert the wheel assembly into
the front fork assembly and align
holes. When installing the wheel,
make sure the letter “F” and
arrow (located on the side of the
wheel) are facing the direction as
shown above.
3 Re-insert the coupling bolts
through the front fork and
tighten securely.