Heating Power Blender Fresco RFHE800A USER MANUAL
This manual contains important information on the safety, use, and maintenance of this product. Before using your Razorri Heated Blender, please read this user manual in its entirety and keep it in an easily accessible place for future reference.
CAUTION 1. Do not use this unit in electric systems other tan 120V~60Hz for USA & Canada. Do not use power converters or adapters, power strips, or extension cords. 2. Do not let the power cord hang over edge of table or counter, or contact hot surfaces, such as the stove. 3. Do not operate this device with a damaged power cord or plug, nor after the device Malfuctions, or is dropped or damaged in any manner. If damaged, the device must be replaced. Contact customer care for more information. 4.
Table of Contents Technical Specifications ····································································· 04 Parts List ························································································· 04 Using your blender ············································································ 05 If you selected a heating mode ····························································· 05 Controls and Features ········································································ 05
Technical Specifications MODEL RFHE800A Voltage 120V~ Frequency 60Hz Motor Power 600W Heating Power 800W Capacity 1200ml Parts List 1 2 1 Lid Cap 2 Lid 3 Handle 4 Glass Pitcher 5 LCD Screen 6 Motor Base 7 Control Panel 8 Measuring Cup 5 9 Cleaning Brush 6 3 4 7 8 04 9
Using your blender 1. Plug in the blender. The blender will emit a beep as the screen lights up. 2. Place the lid on the pitcher, insert the lid cap, and lock into place by rotating. This will remove the E2 error message from displaying on the LCD panel. 3. Press the ON/OFF button, then select a program by pressing the Function button to cycle through all preset programs. The recipe time information will be displayed on the LCD screen. For heating programs, please do not ignore unspecified times.
Time: 1. When in standby mode, press the Time button to adjust the total length of blending. 2. Adjust the time setting by using the + and - buttons. The time range can be set from 0:05 to 3:00 (3 minutes). The default time is 1:00 (1 minute, 0 seconds.) 3. After selecting a time, press the ON/OFF button to confirm and start blending. Blend: 1. When in standby mode, press and hold the Blend button to start the blend function. 2. The Blend function will illuminate. The countdown time is 1 minute. 3.
Preset Programs You can select one of six preset programs with pre-configured time, speed, and temp settings to cook various dishes. While in standby mode, press the Function button to cycle through the 6 available functions. Press the ON/OFF button to confirm and start blending. There are 6 programs: Ice crush, Milk shake, Corn juice, Soup, Paste, and Juice. Ice Crush: - Countdown timer will display 1:40 (1 minute, 40 seconds). - Ice crush function will be illuminated.
Soup: - Blender will heat up to 100°C (time will vary depending on the amount of liquid and ingredients.) - Countdown timer will display 16:00 (16 minutes, 0 seconds). - Soup function will be illuminated. - Blender will run intermittently at various speeds. - The blender will beep 5 times once complete. Caution: Glass pitcher will be hot during blending and after blending is complete. Paste: - Blender will heat up to 100°C (time will vary depending on the amount of liquid and ingredients.
Toubleshooting Solutions Causes Problems LED light is off - Pitcher isn’t put on the motor unit correctly - Power cord hadn’t plugged in - Re-put the jug on the motor unit - Check the power cord LED light is on, but appliance not work - Hadn’t touch the ON/OFF after choose funtion - No liquid in the jug so overheating - Alarm during the appliance working - After choose the function, touch “ON/OFF” again - Add water to the corresponding water level - Unplugged the power, then repower and operate acco
Heating Power Blender USER MANUAL Fresco RFHE800A
