User`s manual

EP-SB Bluetooth Stereo Earphones 7 User’s Manual

WEARING THE EARPHONES (CONTINUED)

3. (Optional) Set up the cord management clips as shown in the illustra-

tion below to keep the cord from interfering with your activity.

PAIRING/CONNECTING THE EARPHONES

Pairing earphones with cell phone via Bluetooth

Prior to using the earphones for the ﬁrst time, you have to pair it with a

Bluetooth-enabled device such as a cell phone. The pairing procedures will

vary depending on the model of cell phone or device. Please refer to your

cell phone’s User Manual for further information about pairing procedures.

1. Keep your earphones turned off and within reach of the cell phone or

Bluetooth device.

2. Press and hold

about 8 seconds until the red and blue LED ﬂash

alternately, this will put the earphones into the pairing mode.

3. Activate your cell phone or Bluetooth device’s Bluetooth function and

search for Bluetooth devices within range, select “RBH EP-SB” from the

list of devices shown (enter password “0000” if prompted).

4. After successfully pairing the earphones and cell phone, the blue LED

light on the earphones will ﬂash twice every four seconds.

NOTE: Pairing mode will last about two minutes, then the earphones will go

back into standby mode if the pairing failed.