User`s manual

EP-SB Bluetooth Stereo Earphones 9 User’s Manual

PAIRING/CONNECTING THE EARPHONES (CONTINUED)

Pairing earphones with multiple devices via Bluetooth

The earphones can be connected with two Bluetooth cell phones at the

same time.

1. Pair the earphones with device one, then turn off the earphones.

2. Turn on the earphones, press and hold about 8 seconds until the

red and blue LED ﬂash alternately, this indicates the earphones are in

paring mode.

3. Pair earphones with device two.

4. Operate device one to connect with earphones. The earphones should

now be connected with both devices.

NOTE: The multiple-pair function is turned off in factory default settings,

to turn on this function follow the steps below:

• Turn ON: Press and hold

and button under standby mode (not

connected device), and release it until you hear four rising tones.

• Turn OFF: Press and hold

and button under standby mode (not

connected device), and release it until you hear four falling tones.

• To improve the connection ability of the earphones, we suggest you

turn off the multiple-pair function when you’re only connecting with

one cell phone.