Owner's Manual High-Performance Subwoofer Amplifiers SA-200, SA-400
Caution!
  Do not open the amplifier, attempt any modifications or repairs.  There are extremely high voltages present 
and any servicing must be referred to RBH Sound or an authorized qualified technician.
Attention!
  Opening the amplifier will void warranty.
Warning!
 To prevent shock or fire hazard, never permit moisture or any liquid to get into the amplifier. If an accidental 
spill occurs, immediately shut off the power, unplug its A.C. power cord and seek a qualified technician for repair.
Caution!
 To reduce the risk of electric shock, do not remove the cover (or back).  No user serviceable parts inside: 
refer servicing to qualified personnel.
All safety instructions should be read before this amplifier is operated.  Please retain these safety instructions for future 
reference. All warnings on the amplifier and in this manual should be adhered to.
  The amplifier should be  situated so that its  location or position  does not interfere with its proper 
ventilation.  The  amplifier  should  not  be situated on  a  bed,  sofa,  rug or  similar  surface that  may  block  the ventilation 
openings, nor should it be placed in a built-in installation such as a bookcase or cabinet that my impede the flow of air 
through the ventilation openings.
 The amplifier should only be connected to a  power supply of the type described in this instruction 
manual or as marked on the amplifier.  Precautions should be taken so that the grounding or polarization means of the 
amplifier are not defeated.
 Power supply cords should be routed so that they are not likely to be walked on or pinched by items 
placed  upon  or  against  them,  paying  particular  attention  to  wall  receptacles  and  the  point  where  they  exit  from  the 
amplifier.
   
 The  amplifier  should  not  be  exposed  to  dripping  or  splashing  and  objects  filled  with 
liquids, such as vases or plants, should not be placed on top of or next to the amplifier.  Care should be taken so that 
objects do not fall and liquids are not spilled into the enclosure through its ventilation openings.
 This amplifier should be serviced by a qualified technician when:
The power supply cord has been damaged; or
Objects have fallen or liquid has been spilled into the amplifier; or
The amplifier does not appear to function normally or exhibits a mar
ked change in performance; or
The amplifier has been dropped or the enclosure is damaged.








