Manual

RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.
150 S. 118
th
Street  P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: [phone]
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet
Date:
08/18
/11
Supersedes: New
PRODUCT #: J0145
RE-START 7001
High-Performance Alkaline Plate Cleaner
Description:
Re
-
start 7001
is a water based
alkaline plate cleaner that will effectively remove lint,
ink, and sensitivity from the printing plate. This product contains ingredients that will
desensitize the non-image area of the plate and provide clean, fast start-ups for
reduced paper waste. Re-start 7001 is easy to use, either by hand or spray and
contains negligible VOC’s and no phosphates.
Directions for Use:
Hand
–
A
pply
Re
-
start 7001
to a clean dampened rag, cloth
, or sponge. W
ipe across
plate surface until ink and contaminants are removed.
Spray – Squirt the Re-start 7001 onto the dampening roller while press is running to
clean the plate up on a re-start or start-up. Do not over use, as the excess water may
break the web.
Specifications:
Appearance:
Clear liquid
Density:
8.5
lbs/gal
VOC Content:
(EPA Method 24)
0.41 lbs/gal, 17 g/L, 2
%
Flash Point:
> 212
°F