Instruction Manual

RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.
150 S. 118
th
Street  P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: [phone]
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet
Date:
03/21/12
Supersedes: 08/16/11
PRODUCT #: J5030
GROWTH INHIBITOR
Anti-Bacterial Growth Additive
Description:
GROWTH INHIBITOR
fountain additive is a special
blend designed to control growth
of bacteria and fungus in the pressroom. The product is designed to work as a
continuous additive controlling growth and as a “quick kill” product to kill actively
growing bacteria and fungi. GROWTH INHIBITOR can be added to mixing tanks
without interrupting production. GROWTH INHIBITOR is highly concentrated and can
be used effectively at relatively low dosage rates.
Directions for Use:
1.
Fountain Additive for continual use:
Add
GROWTH INHIBITOR
at 2.5 oz
per
10 gallons to press ready fountain solution mix. Increase dosage by the
same amount if biological growth persists.
2. Additive for “quick kill” use: Add GROWTH INHIBITOR at an estimated rate
of 1 gallon per 50 gallons of mixed press solution.
3. Straight addition to RO water tanks
Specifications:
Appearance:
Clear
to light blue
liquid
Density:
8.4
lbs/gal
VOC Content:
(EPA Method 24)
None
Flash Point:
None