Manual

PT2 MEASUREMENT MODES
Mode Method of Measurement
Hold once stabilized, the readings are captured then displayed
LIVE real-time readings are displayed continuously during measurement
ACCESSORIES
STANDARD SOLUTIONS FOR CALIBRATION:
The ULTRAPEN™ PT2 requires pH 4, pH 7, and pH 10
buffer solutions for wet calibration and pH Sensor Storage
Solution for proper storage.
Order MODEL#s: PH4, PH7, PH10, and PHSS
REPLACEMENT PH SENSOR (with instructions):
Order Model: RPT2
MYRON L WARRANTY
The PT2, excluding the pH sensor, has a one (1) year
limited warranty.
The pH sensor has a six (6) month limited warranty.
Built On Trust. Founded in 1957, the Myron L Company is one of
the world’s leading manufacturers of water quality instruments.
Because of our commitment to product improvement,
changes in design and specications are possible. You have
our assurance any changes will be guided by our product
philosophy: accuracy, reliability, and simplicity.
2450 Impala Drive
Carlsbad, CA 92010-7226 USA
Tel: [phone]
Fax: [phone]
www.myronl.com
Printed in U.S.A. © Myron L Company 2012 PT2DS 02-12
SPECIFICATIONS
pH Range: 0.00-14.00pH
pH Accuracy: ± 0.01pH (After Wet Calibration)
pH Repeatability: ± 0.01pH
pH Resolution: 0.01pH
Temperature Range: 0-71°C/32-160°F
Temperature Accuracy: ±0.1ºC/±0.1ºF
Temperature Repeatability: ±0.1ºC/±0.1ºF
Temperature Resolution: 0.1ºC/0.1ºF
Time to Reading Stabilization: 10-30 seconds
Power Consumption: Active Mode 37mA, Sleep Mode 2µA
Temperature Compensation: Automatic to 25ºC
Physical Dimensions: 17,15cm L x 1,59cm D or 6.75in. L x 0.625in. D
Weight: 54g/1.9oz. (without soaker cap and lanyard)
Case Material: Anodized Aircraft Aluminum with Protective Coating
Battery Type: N type, Alkaline, 1.5V
Calibration Solutions: pH4, pH7, pH10
Operating/Storage Temperature: 0-55ºC or 32-131ºF
Enclosure Ratings: IP67 and NEMA6
EN61236-1: 2006 – Annex A:
2008:
Electrostatic discharge to case of instrument may cause PT2 to spontaneously power on. If
this happens, the PT2 will power itself off within seconds.