Instruction Manual

Eagle - Onboard air-data measuring system for R/C planes. Page 4
Physical overview
Pictures bellow are showing the Eagle unit. It has build in GPS antenna, one pressure port (Pte – total
energy compensated pressure from TEK probe) and a multi-color LED to show the status of the unit. It
also has 3 connectors. The micro USB is used for future updates, settings and flight log download. The 4
pin connector is prepared for future use (extended bus). JR 3-pin servo input is used to measure normal
PWM servo pulse or to transmit 3
rd
party telemetry protocol on it (depends on unit setting). The unit gets
power from USB or JR connector.
Important: Be careful on polarity when connecting power to the unit. Improper connection can damage
unit! Correct polarization is marked on the bottom of the unit by the servo connector!
micro USB
servo connector
extended bus connector
Multi color LED
Connect TEK probe to Pte port and vario will
be calculated from measuring compensated
pressure at TEK probe.