User manual

Assembly And Installation | 25
The »NovaX 350 is now live! Stay alert!
25.4 Storage
> After every ight remove the battery from the »NovaX 350 and only then turn off the
transmitter.
> Store the battery in a dark, cool and dry place, away from the reach of children.
Moistureanddirectsunlightcanleadtobatterydamageorevenexplosion.
> ItisbesttouseaspeciallydesignedstoragecontainerforLiPobatteriesavailablefrom
specialist shops.
26. ASSEMBLY AND INSTALLATION
The »NovaX 350 was designed in such a fashion that assembly does not requireany
specialknowledgeand can easily be completedinafew steps. Nevertheless, you are
strongly advised to read through the respective chapters before you start to install
components.
Assemblyisdividedintothefollowingsteps:
Step Chapter
1 26.1Whatyouneed
2 26.2 Unpacking
3 26.3 Installing the legs
4 26.4 Installing the PPM receiver
26.1 What you need
> ThesuppliedAllenkey(2.5mm)
> Loctite
®
(Blue)
26.2 Unpacking
> Work on a soft and clean mat.
> Openthebox,takeoutallpartsandopenthepolybags.
26.3 Installing the legs
Two sets of legs (5) are supplied: long and short. The long legs offer more ground
clearance. Follow the installation diagrams [ Fig. 5 ].
Long
Short
Front Rear
Fig. 5