i Recommended Tools Modeling/Craft Knife Hex Driver (1.25mm) Hex Drivers (1.5mm, 2.0mm, 2.5mm) Side Cutters Thread Lock Cross Head Screwdriver (Small) Styrene Glue Cross Wrench (M4) Long Nose Pliers Tips for Assembly Use Acrylic Lacquer or Enamel if you'd like to paint the body parts. Test fit parts before applying glue and use glue sparingly. Use good quality hex drivers to avoid stripping screw heads. Use thread lock when installing metal parts together with metal parts.
ii RC4WD Limited Warranty All RC4WD products are warranted to be free of defects in materials and workmanship when new. Our limited warranty does not cover damages due to normal wear and tear, user error of assembly or installation, user modifications, user's failure to perform routine maintenance, addition of aftermarket parts or option parts. This warranty lasts 30 days after arrival for original purchaser.
iii RTR Step 1 Z-S1227 M2.
iv RTR Step 3 Z-S0652 Z-B0091-8 Z-S0629 Z-S0629 M3 Nut Z-S0652 M3X8 Button Head RTR Step 4
v RTR Step 5 Z-B0017 Z-B0017 RTR Step 6 Move the lever to open/close the cab.
vi RTR Step 7 Z-S0927 Z-S0927 Z-S0927 M2X4 Cap Head Electronic Manual This is a step by step overview of your new Beast II RTR electrical items and how they connect. 1.
vii 2. ESC connected to the Brushed 55T Crawler Motor (Z-E0003) 3.
viii 4. 5.
ix 6. 4-9 NiCd/NiMH cells (1.2V per cell) or 3S 11.1V LiPo. 7. Note: Battery is not included.
x (1) Remove the battery compartment cover (2) Install 4 "AA" batteries and replace compartment cover Turn the switch up, high speed Stay at middle, normal speed.
xi Brake/Speed Down Forward/Speed Up Binding the Transmitter and Receiver Gas Powered Model 3.When the LED on the receiver becomes solid, the binding process is complete.
xii 6x6 Body Z-B0099-1 Z-B0099 5 2 4 3 3
xiii 6x6 Body 7 4 3 Z-B0105 2 1 6 5
xiv 6x6 Body 3 1 Z-B0101 2
xv 6x6 Body 3 4 Z-B0103 5 6 1 2
xvi 6x6 Body 2 3 Z-B0095 1
xvii 6x6 Body 1 Z-B0097 2 6 3 4 5 7
xviii 6x6 Body 3 6 2 Z-B0091 Z-B0091-8 4 7 1
xix 6x6 Body 5 2 6 6 Z-B0089 3 4 1 1 4
xx 6x6 Body 2 1 6 Z-B0087 5 3 7 4 8 9
xxi 6x6 Body 2 4 3 4 5 3 1 7 Z-B0093 7
xxii 6x6 Body 2 2 5 5 5 5 5 5 2 2 5 5 5 5 5 5 2 2 Z-B0085 6 4 7 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 6x6 Body 2 Z-B0107-3 6 1 Z-B0107-3 8 8 8 8 8 8 9 10
xxiii 6x6 Body Z-S1519-1 Z-S1519-2 Z-S1519-3 Z-S1519-5 Z-S1519-4 6x6 Body Z-S1523-1 Z-S1523-2 Z-S1523-5 Z-S1523-4 Z-S1523-3 6x6 Body Z-S1525-1 Z-S1525-2 Z-S1525-3 Z-S1525-4 6x6 Body Z-S1521-6 Z-S1521-7 6x6 Body Z-S1531-1 Z-S1531-2
xxiv 6x6 Body Z-S1521-1 Z-S1521-2 Z-S1521-3 Z-S1521-5 Z-S1521-4 6x6 Body Z-S1527-1 Z-S1527-2
xxv 6x6 Body Z-S1529-1 Z-S1529-2 Z-S1529-3 Z-S1529-4 Tire Z-T0075 Z-W0119-1 Z-W0119-2 Z-W0119-3 Accessories Z-S0277 Z-B0017 Z-S0238 Z-S0599 Z-S1546-6 Z-S0430 Z-C0050-1 Transmission Z-U0034 Z-U0029
xxvi Driveshafts Z-S0583 Z-S0443 Z-S1548 Girde Z-C0046-1 Z-C0046-2 The Frame Z-S1534 Z-S1542 Z-C0050-2 Z-C0050-3 Z-S1536 Z-C0046-5 Z-C0046-3 Z-C0046-6 Z-C0046-7 Z-S1532
xxvii The Frame Z-S1530 Z-S1528-1 Z-C0048 Z-S1540-1 Z-C0046-4 Z-S1546-1 Z-S1546-5 Z-S1528-2 Z-S1546-3 Z-S1546-2 Z-S1538 Z-S1546-4 Connecting Rods Z-S0807/(59mm) Z-S0399 Z-S1084/(52mm) Z-S0884/(50mm) Z-S0402
xxviii Connecting Rods Z-S1550/(71.5mm) Z-S0401 Z-S0398 Z-S1552/(41mm) Z-S0819/(70mm) Z-S0810/(104.
xxix All of the hardware should be taken from Hardware Bags A/B/C/D. Z-S1227 M2.
1 Assembly 1 Z-B0103-6 ① Z-B0103-1 Z-B0099-1 ② Z-B0089-3 Assembly 2 Z-S1531-1 Z-B0105-1 Note: If painting kit parts, please do not tear off paper covering windshield.
2 Assembly 3 Z-B0105-1 Assembly 4 Z-B0105-1 Z-B0091-1
3 Assembly 5 Z-B0101-2 Z-B0099-5 Z-B0105-4 Assembly 6 Z-B0087-1 Z-B0091-4 Z-B0105-5
4 Assembly 7 Z-S0629 Z-S1529-4 Z-S0629 M3 Nut Z-S0653 Z-S1529-1 Z-B0087-8 Z-S1529-4 M3X7.2 Bushing Z-S0653 M3X10 Button Head Z-S1529-4 & Z-S1529-1 can be found in Bag 17. Assembly 8 Z-S0629 Z-S1529-2 can be found in Bag 17. Z-S0654 Z-S1524 M3 Nut Z-S1524 Z-S0745 Z-S0629 M3.
5 Assembly 9 Z-B0089-2 Z-B0099-2 Z-B0089-2 Assembly 10 Z-B0087-9 Z-B0087-7 Z-B0087-2
6 Assembly 11 Z-B0101-3 Assembly 12 Z-B0093-1 Z-B0093-2
7 Assembly 13 Z-B0097-3 ② Z-B0093-3 ① Z-B0097-4 Assembly 14 Z-B0085-7 Z-B0085-10
8 Assembly 15 Z-B0101-1 Assembly 16 Note: Z-B0099-4 does not require glue.
9 Assembly 17 Z-S1519-2 & Z-S1519-3 can be found in Bag 14. ② ① Z-S1522 Z-B0085-9 Z-B0085-6 Z-B0095-3 Z-S1522 M2.5X2 Set Screw Z-S1519-3 ③ Z-S1519-2 Assembly 18 Z-B0105-6 Z-S1519-1 Z-S1519-1 can be found in Bag 14.
10 Assembly 19 Z-S1519-5 Z-S1519-5 can be found in Bag 14. Z-S1519-5 Assembly 20 Z-S1519- 4 Z-S1519-4 Z-S1519-4 can be found in Bag 14.
11 Assembly 21 Assembly 22 Z-B0103-3 Z-B0103-2
12 Assembly 23 Z-B0105-2 Z-B0105-7 Z-B0105-3 Z-B0103-4 Z-B0103-5 Z-S1518 Z-S1529-3 Z-S1518 Z-B0097-5 M2X6 Flat Head Z-S1529-3 Z-S1518 Z-S1529-3 can be found in Bag 17.
13 Assembly 25 Z-B0097-6 Z-B0107-1 Z-B0107-2 Z-B0091-7 Z-B0091-3 Assembly 26 Z-B0091-3 Z-B0091-7
14 Assembly 27 Z-B0091-2 Z-S1531-2 Assembly 28 Z-S1531-2 Z-B0091-2
15 Assembly 29 Z-S1525-2 Z-B0097-7 Z-S1525-2 Z-B0097-7 Z-S1520 Z-S1520 M1.4X3 Flat Head Z-S1525-2 can be found in Bag 14.
16 Assembly 31 Assembly 32 Z-T0075 Z-W0119-2 Z-W0119-1 Z-W0119-3 Z-S1533 Z-S1533 M1.6X12 Screw Z-S1230 Z-S1230 M1.6 Nut Note: Assemble six tires.
17 Assembly 33 Z-S1514 Z-S1514 M4X25 Button Head Z-S0620 Z-S1527-1 Z-S0620 M4 Nut Note: Spare Wheel and Tire are not included in KIT Version. Assembly 34 Z-S1227 Z-S1227 Z-S1527-2 M2.5X8 Button Head Z-S1527-2 Z-S1527-2 can be found in Bag 17.
18 Assembly 35 Z-S1521-4 Z-B0097-1 Z-S1521-5 Z-B0095-1 Z-S1521-3 Assembly 36 Z-B0085-4 Z-B0099-3 Z-B0089-5 Z-B0085-4 Note: Install in the inner side of the carriage.
19 Assembly 37 Z-B0085-8 Z-S1521-6 Z-B0085-8 Z-S1521-7 Assembly 38 Z-B0089-1 Z-S0649 Z-S1521-2 Z-S1521-1 Z-S0649 M3X8 Flat Head
20 Assembly 39 Z-S1546-6 Z-S1057 Z-S1057 M3X12 Set Screw Z-S1546-6 Z-S1546-6 can be found in Bag 18. Assembly 40 Z-B0093-7 Z-S0927 Z-S1523-3 Z-S1523-4 Z-S1523-5 Z-S1523-5 Z-B0107-3 Z-B0107-3 B0107-3 S1523-2 Z-B0093-7 Z-S1523-1 Z-S0927 M2X4 Cap Head Z-S1523-1, Z-S1523-2, Z-S1523-3 & Z-S1523-4 can be found in Bag 16.
21 Assembly 41 Assembly 42 Z-B0093-5 Note: Install in the inner side of the carriage.
22 Assembly 43 Z-B0089-4 Z-B0089-6 Z-B0087-4 Z-B0085-5 Z-B0087-6 Z-B0087-3 Z-B0085-5 Z-B0085-5 Z-B0087-5 Z-B0085-2 Z-B0089-4 Assembly 44 Z-S0652 Z-B0091-8 Z-S0629 Z-S0629 M3 Nut Z-S0652 M3X8 Button Head
23 Assembly 45 Z-B0085-3 Z-B0085-2 Assembly 46 Z-S1540-2, Z-S1540-3 & Z-S1540-4 can be found in Bag 28.
24 Assembly 47 Z-S0652 Z-A0080 Z-S0652 M3X8 Button Head Assembly 48 Z-S0795-2 Z-S0649 Z-A0010 Z-S0649 M3X8 Flat Head Z-S0795-2 can be found in Bag 29.
25 Assembly 49 Z-S0655 Z-S0795-1 Z-S0795-1 can be found in Bag 29. Z-S0655 M3X14 Button Head Assembly 50 Z-S0649 Z-S1544-1 can be found in Bag 21.
26 Assembly 51 Z-S0655 Z-S1544-2 Z-S0655 Z-S1544-2 can be found in Bag 21. M3X14 Button Head Assembly 52 Links can be found in Bags 23/24/25/26/27. Rod Ends can be found in Bags 31/32/33/34. Z-S0807 M3X15mm 59mm Link M3X15mm Make 2 50mm Link M3X15mm Make 2 52mm Link M3X15mm Make 6 Z-S0399 Z-S0884 Z-S1084 Z-S1550 Z-S0402 Z-S0399 71.5mm Link Assembly 53 Z-S1552 M3X12mm 41mm Link Z-S0399 Make 2 Z-S0819 Z-S0398 M3X12mm 70mm Link M3X10mm 104.
27 Assembly 54 Z-S1528-1 can be found in Bag 19. Z-U0034 Z-S0960 Z-S0960 Z-S1528-1 M3X6 Button Head Assembly 55 Z-S1528-2 can be found in Bag 19.
28 Assembly 56 Z-C0050-1 can be found in Bag 19. Z-C0050-1 Z-S0648 Z-C0050-1 Z-C0050-2 Z-S0648 M3X6 Flat Head Z-C0046-5 Z-S0652 Z-S0652 M3X8 Button Head Assembly 57 Z-S1530 can be found in Bag 20.
29 Assembly 58 Z-C0046-3 Z-C0048 Z-C0046-1 Z-C0046-6 Z-S0652 Z-S0652 M3X8 Button Head Z-S0653 Z-S0653 M3X10 Button Head Assembly 59 Z-C0046-4 & Z-C0046-7 can be found in Bag 19. Z-C0046-2 Z-S1538 Z-S0652 Z-S0652 Z-C0046-4 M3X8 Button Head Z-S0653 M3X10 Button Head Z-S0654 Z-S0654 M3X12 Button Head Z-S0654 Z-S0653 Z-S0653 Z-S0649 M3X8 Flat Head Z-C0046-7 Z-S1538 is a white plastic part.
30 Assembly 60 Z-S0648 Z-C0050-3 Z-S0648 M3X6 Flat Head Assembly 61 Z-S1532 Front Z-S1534 Rear
31 Assembly 62 Z-S1536 can be found in Bag 20.
32 Assembly 64 Z-S0653 Z-S1540-1 can be found in Bag 20.
33 Assembly 66 Z-S0804 Z-S0804 M3 Driveshaft Pin Assembly 67 Z-S0653 M3X10 Button Head Z-S0653
34 Assembly 68 Z-S0804 Z-S0804 M3 Driveshaft Pin Assembly 69 Z-S1546-3 Z-S1546-4 Z-S0927 Z-S1546-4 can be found in Bag 22.
35 Assembly 70 Z-S1546-5 can be found in Bag 22.
36 Assembly 72 59mm Link Z-S0654 Z-S0654 M3X12 Button Head Assembly 73 71.
37 Assembly 74 Z-D0039 Z-S0600 Z-S0600 M3X2 Spacer Z-S0654 Z-S0654 Z-S0600 Z-S0654 M3X12 Button Head Assembly 75 Z-S0809 Z-S0654 Z-S0809 M3X1 Spacer Z-S0654 M3X12 Button Head 104.
38 Assembl y76 Z-S0809 Z-S0895 Z-S0653 Z-S0809 M3 X 1 Spacer Z-S0653 M3X10 Button Head Z-S0895 M3X20 Button Head Assembly 77 Z-S0654 Z-S0654 Z-S0654 M3X12 Button Head
39 Assembly 78 Z-S0653 70mm Link Z-S0653 Z-S0653 M3X10 Button Head Assembly 79 52mm Link Z-S1367 Z-S0629 Z-S0629 M3 Nut Z-S1367 M3X22 Cap Head
40 Assembly 80 Z-S0654 Z-S0654 Z-S0654 71.
41 Assembly 82 Z-S0656 Z-S0629 Z-S0629 M3 Nut Z-S0655 Z-S0655 M3X14 Button Head Z-S0656 M3X16 Button Head Assembly 83 Z-S0654 M3X12 Button Head Z-S0654
42 Assembly 84 50mm Link Z-S1367 Z-S0629 Z-S0629 M3 Nut Z-S1367 M3X22 Cap Head Assembly 85 71.
43 Assembly 86 Z-D0039 Z-S0654 Z-S0600 Z-S0600 M3 X 2 Spacer Z-S0654 M3X12 Button Head Z-S0654 Z-S0600 Assembly 87 Z-S0656 Z-S0629 Z-S0629 M3 Nut Z-S0654 M3X12 Button Head Z-S0656 M3X16 Button Head Z-S0629 Z-S0656 Z-S0654
44 Ring Assembly Z-S0443 ① ② ③ Assembly 88 Z-S0125 Z-S0125 M3X5 Set Screw Z-S1548
45 Assembly 89 Z-S0654 Z-S0654 M3X12 Button Head Assembly 90 Z-S0125 Z-S0583 Z-S0125 M3X5 Set Screw Z-S0125
46 Assembly 91 Z-S0804 Z-S0804 M3 Driveshaft Pin Assembly 92 Note: Servos are not included in KIT Version.
47 Assembly 93 Z-S0652 Z-S0652 M3X8 Button Head Z-S0653 Z-S0653 M3X10 Button Head Assembly 94 Z-S0652 Z-S0652 M3X8 Button Head
48 Assembly 95 Assembly 96 Z-S0960 M3X6 Button Head Z-S0960
49 Assembly 97 41mm Link Z-S0653 Z-S0653 M3X10 Button Head Assembly 98 Z-S0238 Z-S0277 Z-S0238 Z-S0277
50 Assembly 99 Z-S0620 Z-S0620 Z-S0620 M4 Nut Assembly 100 Note: Motor is not included in KIT Version.
51 Assembly 101 Z-S0960 Z-S0960 M3X6 Button Head Assembly 102 Z-S0648 M3X6 Flat Head Z-S0648
52 Assembly 103 Z-S1529-3 Z-S1518 Z-S1518 M2X6 Flat Head Assembly 104
53 Assembly 105 Z-B0017 Z-B0017 can be found in Bag 18. Z-B0017 Complete Assembly 106 Before Adjustment The installation of 6x6 rear axles gear is different than the G2. Reinstall if you plan on using this axle on another truck.
54 Disassembly Disassembly 1 1 M2x6 Cap Head Disassembly 2 M2x10 Cap Head Disassembly 3 M2x6 Cap Head M2x6 Cap Head
55 Adjust Reverse Assembly 1 M2x6 Cap Head M2x6 Cap Head Assembly 2 M2x10 Cap Head
56 Assembly 3 Please focus on third member direction.
57 Spare Parts Z-D0039 Z-U0034 Z-U0029 Z-S0583 Z-A0080 Z-A0010 Z-A0081 Z-S0599 Z-S0794 Z-S0795 Z-S0810 Z-S0819 Z-S0807 Z-S0884 Z-S1084 Z-S0398 Z-S0401 Z-S0402 Z-S0399 Z-T0075 Z-W0119 Dual Spring 80mm Scale Black Shocks (Ver 2) R3 Scale 2 Speed Cast Transmission Triton Transfer Case (1/1) Scale Nylon Short Punisher Shaft (89mm-120mm) Yota II Ultimate Scale Cast Axle (Front) Yota II Ultimate Scale Cast Axle (Center Rear) Yota II Ultimate Scale Cast Axle (Rear) Metal Drive Coupling Front 3 Link & Panhard Mou
58
