User's Manual

10
Scan types

The transceiver has priority scan and normal scan. (Refer to set mode program-
ming).
When the weather alert function is turned ON, the previously selected (last used)
weather channel is also checked while scanning.
Set the TAG channels (scanned channels) before scanning. Clear the TAG chan-
nels which inconveniently stop scanning.
Normal scan:
Normal scan searches through all TAG channels in sequence. Channel 16 is not
checked unless Channel 16 is set as a TAG channel.
Priority scan:
Priority scan searches though all TAG channels in sequence while monitoring
Channel 16.
Setting TAG channels

For more effi cient scanning, add desired channels as TAG channels or clear the
TAG for unwanted channels.
Channels that are not tagged will be skipped during scanning.
Setting / clearing a single tagged channel 
Push 1. [U/I/C] (both [▲] and [▼]) several times to select the desired channel
group.
Select the desired channel to be set as a TAG channel.2.
Push and hold 3. [SCAN] for 1 sec. to set the displayed channel as a TAG
channel.
” 
”appears in the display.
To cancel the TAG channel setting, repeat step 4. ③.
” 
”disappears.
Setting / clearing all tagged channels 
While pushing and holding 1. [HI/LO] on the microphone, push [SCAN] for 3
sec. to clear all TAG channels in the selected channel group.
Repeat above procedure to set all TAG channels.2.
Starting a scan

Set scan resume timer in advance using Set mode.
Push 1. [SCAN] to start priority or normal scan.
“SC” blinks during priority scan; “SCAN” blinks during normal scan. 
Channel 16 is monitored during priority scan. 
Push  [▲] or [▼] to change the scanning direction.
A beep tone sounds and “SC 16” blinks at the channel comment indicator 
when a signal is received on Channel 16 during priority scan.
To stop the scan, push 2. [SCAN].
SCAN OPERATION