User's Manual

13
Push 4. [▲] or [▼] to input 9-digit of the appropriate address ID.
Push [16] or [CH/WX] to move the cursor forward or backward, respec- 
tively.
Push [SCAN] to cancel and exit the condition. 
Note: 1
st
digit “0” is fi xed for a group ID. When you input 1
st
digit “0” and other 8 digits,
the ID is automatically registered as a group ID.
After inputting 9-digit ID, push 5. [DSC] to input 5 characters ID name using
[▲] or [▼].
P  ush [16] or [CH/WX] to move the cursor forward or backward, respec-
tively.
P u  sh [SCAN] to cancel and exit the condition.
Push 6. [DSC] to program and exit the DSC menu.
Deleting address ID 
Push [DSC] to enter the DSC menu.1.
Push [▲] or [▼] to select “ADDRESS” and push [DSC].2.
Push 3. [▲] or [▼] to select “DEL”, then push [DSC].
When no address ID is programmed, “NO ID” is displayed. 
Push 4. [▲] or [▼] to select the desired ID name for deleting and push [DSC],
“READY” appears.
Distress call

A Distress call should be transmitted if, in the opinion of the master, the ship or a
person is in distress and requires immediate assistance.
Note: Never use the Distress call when your ship or a person is not in an emer-
gency. A Distress call can be used only when immediate help is needed.
Transmitting a Distress call 
While opening the key cover, push 1. [DISTRESS] for 5 sec. to transmit the
Distress call.
Emergency channel (Channel 70) is automatically selected and the Dis- 
tress call is transmitted.
After transmitting the call, the transceiver waits for an acknowledgment call 2.
on Channel 70.
The Distress call is automatically transmitted about every 4 minutes. 
“DSC REPEAT” scrolls at the channel comment indicator. 