User's Manual

19
Transmitting Position Request call 
Transmit a Position Request call when you want to know a specifi ed ship’s cur-
rent position, etc.
Push 1. [DSC] to enter the DSC menu.
Push 2. [▲] or [▼] to select “POS REQUEST”, then push [DSC].
Push 3. [▲] or [▼] to select the desired pre-programmed individual address.
The ID code for position request must be set in advance. 
Push 4. [DSC] to enter the standby condition for Position Request call.
Channel 70 is selected and “READY” appears. 
Push 5. [DSC] to transmit the Position Request call.
After the Position Request call has been transmitted, the following indication 6.
is displayed.
“WAIT ACK” scrolls at the channel comment indicator. 
Push any key to exit the condition and return to the normal operation.7.
Transmitting Position Report call 
Transmit a Position Report call when you want to announce your own position to
a specifi c ship and to get an answer, etc.
Push 1. [DSC] to enter the DSC menu.
Push 2. [▲] or [▼] to select “POS REPORT”, and push [DSC].
Push 3. [▲] or [▼] to select the desired pre-programmed individual address.
The ID code for the position report call can be set in advance. 
Push 4. [DSC] to enter the standby condition for Position Report call.
Channel 70 is selected and “READY” appears. 
Push 5. [DSC] to transmit the Position Report call.