User's Manual

20
After the Position Report call has been transmitted, stand by on Channel 70 6.
until an acknowledgement is received.
“WAIT ACK” scrolls at the channel comment indicator. 
Push any key to exit the condition and return to the normal operation.7.
Receiving a Position Request call 
While monitoring Channel 70 and a Position Request call is received:
“DSC” appears and “RCV POS REQUEST” scrolls at the channel comment 1.
indicator.
Push any key to stop the beep.2.
Push 3. [DSC] to reply to the call; Push any other key to ignore the call.
Receiving a Position Report call 
While monitoring Channel 70 and a Position Report call is received:
“DSC” appears and “RCV POS REPORT” scrolls at the channel comment 1.
indicator.
Push any key to stop the beep.2.
Push 3. [DSC] to reply to the call; Push any other key to ignore the call.
The ‘Latitude’ and ‘Longitude’ from the called station is displayed and 
scrolled automatically in order of Latitude co-ordinates and then Longitude
co-ordinates after replying the call.
Receiving a Position Reply call 
While monitoring Channel 70 and a Position Reply call is received:
“DSC” and “POS REPLY” appear in the display.1.
The ‘Latitude’ and ‘Longitude’ from the called station is displayed and 
scrolled automatically in order of Latitude co-ordinates and then Longi-
tude co-ordinates.
Push any key to stop the beep.2.
Receiving a Position Report Reply call 
While monitoring Channel 70 and a Position Report Reply call is received:
“DSC” and “POS REPLY” appear in the display.1.
The ‘Latitude’ and ‘Longitude’ you have sent is displayed and scrolled 
automatically in order of Latitude co-ordinates and then Longitude co-
ordinates.
Push any key to stop the beep.2.