Desktop Speakerphone with Amplified Volume and Tone Control User’s Guide Please read this manual before operating product for the first time. Visit the RCA web site at www.rca4phones.
Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment.
(2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations. The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations.
HearingAidCompatibility(HAC) This telephone system meets FCC standards for Hearing Aid Compatibility. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. IndustryCanada(I.C.
Table of Contents Equipment Approval Information.....2 Interference Information ..................3 Hearing Aid Compatibility (HAC).........4 FCC RF Radiation Exposure Statement................................................4 Introduction ...........................................6 Before You Begin ................................7 Parts Checklist .................................................7 Telephone Jack Requirements ...............7 Memory ................................................
Introduction CAUTION: When using telephone equipment , there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. This phone is designed for those individuals with mild to severe hearing loss. The unit is designed to control the volume of the phone as well as the frequencies that fit your hearing.
Before You Begin Parts Checklist Make sure your package includes the items shown here. REDIA L ST OR E 2 5 8 0 ABC 4 7 GHI P QR S * TONE JKL TUV O PER DEF MNO 3 6 WXYZ PAUSE EXIT / F L ASH # + MUT E A M P L I FY VOL U M E Base Handset Desktop pedestal Coiled cord Line cord Telephone Jack Requirements To use this phone, you need an RJ11C type modular telephone jack, which might look like the one pictured here, installed in your home.
BaseLayout M1/M3 memory buttons M2/M4 memory buttons M2 M3 M4 AUDIO TONE CONTROL U M1 ABC GHI 4 7 PQRS TONE button * TONE JKL TUV OPER 2 5 8 0 DEF = REDIAL button STORE STORE button # PAUSE button MNO EXIT/FLASH button WXYZ PAUSE EXIT/ FLASH MUTE + VOLUME SPEAKER button 3 6 9 # R EDIAL AMPLIFY VOLUME button MUTE button AMPLIFY button
Back & Side Views Volume Override Switch TEL.
Installing the Phone Connecting the Telephone Line NOTE: The unit is shipped from the factory for placement on a level surface. 1. Choose an area near a telephone wall jack (RJ11C), and place your cordless telephone on a level surface, such as a desktop or tabletop, or you may mount it on the wall. 2. Plug one end of the telephone line cord into the Line jack at the back of the base and the other end into a modular jack. 3.
Wall Mounting To detach the desktop pedestal: 1. Rotate the hook 180°. (Refer to Dia.1A) 2. Plug one end of the straight telephone line cord into the jack on the bottom of the base. 3. on the bottom of the base unit if you’ve opened them before. 4. Feed the line cord through the groove and plug the end into the modular telephone jack. Excess telephone line can be stuffed into the recess area on the bottom of the Base Unit . 5.
Telephone Operation Speakerphone For hands-free operation and convenience, this unit is equipped with a speakerphone. For best speakerphone performance, avoid the following: • Areas with high background noise. (The microphone might pick up these sounds and prevent the speakerphone from going into the receiving mode when you finish talking.) • Surfaces affected by vibration. • Recessed areas such as in a corner, under a cupboard, or next to a cabinet, which can generate an echo effect.
Speakerphone 1. When the phone rings, press the speaker button to answer a call. 2. When finished, press the speaker button to hang up. You may switch between the speakerphone and the handset during the dialing process or anytime during a conversation. Speakerphone to Handset -Pick up the handset to disable the speakerphone. The speakerphone indicator turns off. Handset to Speakerphone -Press the speaker button, and then hang up the handset.The speakerphone indicator turns on and the handset is disabled.
WARNING: This Product is designed for users with hearing disabilities and automatically amplifies the volume to the highest level when the Amplify Override switch is set to “ON”. If you wish to prevent the automatic amplification, please turn the Amplify Override switch located on the back of the set to “OFF”. Audio Tone Control The phone’s Audio Tone Control boosts the sound of the frequency range from 600Hz to 3KHz to compensate for the ear’s limited sensitivity in the range. 1.
Memory Store as many as 4 numbers in memory for easy dialing. They can be stored the one-touch memory on the top of the Base unit.You can use the space provided to either write the name of your contacts or stick pictures for easy recognition. Storing a Number in Memory 1. Pick up the handset or press SPEAKER. 2. Press the STORE button. 3. Dial the number to be stored (up to 16 digits). 4. Press the STORE button. 5. Select and press any of the one-touch Memory Location buttons. 6.
Changing a Stored Number Follow the same steps as “Storing a Number into Memory.” The new numbers will overwrite the existing numbers. Dialing a Number from Memory You can dial numbers from memory when using the handset or speakerphone. When you get a dial tone, press the one-touch memory button for the number you want to dial. Troubleshooting Guide No dial tone • Check installation: Make sure the telephone line cord is connected to the base unit and the wall phone jack. • Check the hook switch.
Memory dialing • Make sure you entered numbers correctly. (See “Memory.”) • Make sure the telephone is properly installed. Pick up the handset and listen for the dial tone. If you don’t hear the dial tone, recheck or repeat the installation steps. General Product Care To keep your telephone working and looking good, follow these guidelines: • Avoid putting the phone near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps ).
WarrantyAssistance Your sales receipt will be required to demonstrate proof of purchase in order to validate your warranty eligibility. You may want to attach either the original, or a photocopy, of your sales receipt to this booklet for future reference. If this product was received as a gift, it is suggested you jot down the date of gift receipt, as this information will be valuable should service be required during the warranty period.
• Call Customer Care at 1-877-722-4908. Please have your product with you and please have your model number and date code available when calling us. The model number and date code can be found on the underside of the base unit . If you are within your limited warranty period and it is determined that service is required: • We will ask that you properly pack your product to avoid shipping damage. We recommend that you use the original carton and packing materials.
POWER US A LLC, ITS AGENTS, E M P L O Y E E S , RETAIL DEALERS OR INDEPENDENT CONTRACTORS SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. • REPAIR OR REPLACEMENT A S PROVIDED UNDER T H I S WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. SUPREME POWER USA LLC SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
