Quick Set-up Guide for Optional/Additional Model 2100 DECT 6.0 Cordless Handset for use with Systems 2101 and 2102 Series Please read this manual before operating product for the first time. Visit the RCA web site at www.rca4phones.
Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment.
2 Rights of the Telephone Company Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately.
If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-0034 5-4 when ordering copies.
Table of Contents Equipment Approval Information.......2 Interference Information .....................3 Hearing Aid Compatibility (HAC)...........4 FCC RF Radiation Exposure Statement ............4 Information for DECT Product ............4 Industry Canada (I.C.) Notice .............6 IMPORTANT SAFETY INSTRUCTIONS ..6 SAVE THESE INSTRUCTIONS ...............7 Before You Begin ..............................7 Installation ........................................7 Digital Security System .....................
IndustryCanada(I.C.)Notice This product meets the applicable Industry Canada technical specifications. Le présent materiel est conforme aux specifications techniques applicables d'Industrie Canada. The Ringer Equivalence Number is an indication of the maximum number of terminals allowed to be connected to a telephone interface.
IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out. Before You Begin Parts Checklist Make sure your package includes the items listed here.
with interference, please refer to the owner’s manual for these devices on how to properly set channels to avoid interference. Typical devices that may use the 1.9GHz DECT frequency for communication include wireless audio/video senders, wireless computer networks, multi-handset cordless telephone systems, and some long-range cordless telephone systems. Important safety instructions • Use only the power supply listed in the user instructions. • Use only the batteries listed in the user instructions.
Installing the Phone Installing the Handset Battery NOTE: You must connect the handset battery before use. Nickel metal Hydride batt er y (Ni-MH) batt er y (Brand name: SANIK, Model name: 2SN-AAA55H-S-J1, Capacity: 2.4V/550mAh; B r a n d n a me : B Y D, M o de l na me : H - A A A 5 5 0 B X 2 , C a pa c i ty : 2 .4 V/5 5 0 mA h;Bra nd na me :CO RUN ,Mo de l na me :N I- M H AAA550,Capacity:2.4V/550mAh), that is compatible with this unit . 1.
Handset Charging Cradle 1. Plug the AC power converter of the charging cradle into the electrical outlet. CAUTION: To reduce risk of personal injury, fire, or damage use only the power adaptor (Manufacturer: ESL, Type: IA5060, 120Vac/6Vdc/ 500mA) listed in the user’s guide. This power adaptor is intended to be correctly orientated in a vertical or floor mount position. 2. Place the handset in the charging cradle. The charge indicator turns on, verifying the battery is charging. 3.
Programming the Telephone Name the handset The name of the handset can be up to 12 characters. It is displayed on the handset screen in standby mode. 1 Press MENU. 2 Select [PERSONAL SET] > [HANDSET NAME], then press [OK] to confirm. 3 Enter or edit the name. To erase a character, press [BACK]. 4 Press [OK] to confirm. »» The setting is saved. Set the display language 1 Press MENU. 2 Select [PERSONAL SET] > [LANGUAGE], then press [OK] to confirm. 3 Select a language, then press [OK] to confirm.
confirm. 3 Select [ON]/[OFF], then press [OK] to confirm. »» The setting is saved. Intercom Operation An intercom call is a call to another handset that shares the same base station. A conference call involves a conversation among you, another handset user and the outside callers. Make a call to another handset Note •• If the base station only has 2 registered handsets, press INT to make a call to another handset. 1 Press INT. The handsets available for intercom are displayed.
During an external call 1 Press INT to initiate an internal call. »» The handsets available for intercom are displayed. »» The external caller is put on hold. 2 Select or enter a handset number, then press [OK] to confirm. »» The selected handset rings. 3 Press on the selected handset. »» The intercom is established. 4 Press and hold INT on your handset. »» You are now on a 3-way conference call with the external call and the selected handset . 5 Press to end the conference call.
Battery Safety Precautions • Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury. • To reduce the risk of fire or personal injury, use only the Nickel-metal Hydride battery listed in the User’s Guide. • Keep batteries out of the reach of children. • Remove batteries if storing over 30 days. Causes of Poor Reception • • • • • • • • • • Aluminum siding. Foil backing on insulation.
Frequently asked questions The signal icon blinks on the screen • The handset is out of range. Move it closer to the base station. • If the handset displays [UNREGISTERED], register the handset. Tip • For more information, see “Registration” on the advanced settings section. If I fail to register the additional handsets to the base station, what do I do? Your base memory is full. Un-register the unused handsets and try again. No dialing tone • Check your phone connections. • The handset is out of range.
items of information are stored in the base station. Then the handset retrieves thedata from the base station after a few seconds. When you press the call log/phonebook but that ·Information is displayed on the handset. The handset loses connection with the base or the sound is distorted during a caII. •• Disconnect the power supply from both the handset and base station. Try again after 1minute.
Warranty Assistance Your sales receipt will be required to demonstrate proof of purchase in order to validate your warranty eligibility. You may want to attach either the original, or a photocopy, of your sales receipt to this booklet for future reference. If this product was received as a gift, it is suggested you jot down the date of gift receipt , as this information will be valuable should service be required during the warranty period.
• Call Customer Care at 1-877-722-4908. Please have your product with you and please have your model number and date code available when calling us. The model number and date code can be found on the underside of the base unit. If you are within your limited warranty period and it is determined t h a t service is required: • We will ask that you properly pack your product to avoid shipping damage. We recommend that you use the original carton and packing materials.
Limitation of Warranty: • THIS LIMITED WARRANT Y IS THE ONLY WARRANT Y APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING A L L IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) A R E HEREBY DISCLAIMED. NO VERBAL OR WRIT TEN INFORMATION GIVEN BY SUPREME POWER USA LLC, ITS AGENTS, EMPLOYEES, RETAIL DEALERS OR INDEPENDENT CONTRACTORS SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
Visit theRCAwebsiteatwww.rca4phones.com Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product .