User's Guide

22
2 . Press the mute/menu OK button to enter the menu. The screen
displays YES NO . The default setting is NO .
3 . Use the caller ID-volume (  or  ) button to move the cursor to YES
or NO .
NOTE: If you choose YES all the settings in the programmable
menu are returned to factory default setting.
4 . Press the mute/menu OK button to save your selection. You will
hear a confirmation tone.
T elephone Operation
Visual Indicator s
Base
The charge/in use indicator on the base will flash to alert you to an
incoming call, during paging, or if you have a message waiting from your
service pr ovider . The indicator will remain lit when a handset is in the base
charging or when the line is in use.
Handset
The TALK/SPEAKER indicator buttons flash when you receive a call and
remain lit during a call.
The keypad and CID will also illuminate when a call is received.
VMWI / Visual Ringer Indicator on Handset
I M P O R T A N T : In order to use this unit’s Voice Mail Waiting Indicator
( V M WI ) feature, you must subscribe to this service from your phone
company.
The VMWI indicator on the top of the handset flashes when you receive a
new message from your service pr ovider . Also , it serves as a Visual Ringer
function. It will flash when there is an incoming call.
Speakerphone Operation
NOTE: If you are using the speakerphone, remain close to
handset so the party you are speaking to can hear you.
If you are using the earpiece and want to switch to the speakerphone,
press the TALK/SPEAKER button, press END button to end conversation.
If you are using the speakerphone and want to switch to the earpiece,
press the TALK/SPEAKER button again, press END button again to end
conversation.