User's Guide

9
Installation
Digital Security S yst em
Your cordless phone uses a digital security
system to protect against false ringing,
unauthorized access, and charges to your
phone line.
Modular
telephone
line jack
Wall plate
INSTALLATION NOTE: Some cordless telephones operate at
frequencies that may cause or receive interference with nearby
TVs, microwave oven, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be
placed near or on top of a TV, microwave ovens, or VCR. If such
interference continues, move the cordless telephone farther
away from these appliances.
Certain other communications devices may also use the 1.9GHz
DECT frequency for communication, and, if not properly set ,
these devices may interfere with each other and/or your new
telephone. If you are concerned with interference, please refer
to the owner’s manual for these devices on how to properly set
channels to avoid interference. Typical devices that may use
the 1.9GHz DECT frequency for communication include wir eless
audio/video senders, wireless computer networks, multi-
handset cordless telephone systems, and some long-range
cordless telephone systems.
Impor tant Installation Guidelines
• Avoid sources of noise and heat , such as motors, fluorescent lighting,
microwave ovens, heating appliances and direct sunlight .
• Avoid areas of excessive dust , moisture and low temperature.
• Avoid other cordless telephones or personal computer s.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.