Manual

Acombinationantennareceivesnormalbroadcastchannels(VHF2-13andUHF14-69).Yourconnectioniseasysinceyouwillconnect
theantennatothe75OHMANTENNAINPUTjackontherearoftheTV.
If antennahasaroundcable(75ohm)ontheend,then arereadytoconnectit totheTV.Gotothenextstep.If
your you your
antennahasflattwin-leadwire(300ohm),youfirstneedtoattachtheantennawirestothescrewsona300to75ohmadapter
(notsuppliedwithTV).
Pushtheroundendoftheadapterorantennacableontothe75OHMANTENNAINPUTjackontherearoftheTV.Iftheroundend
oftheantennacableisthreaded,screwit downtight.
PlugtheTV's cordintoa outletandturnontheTV.SetTV/CATVtoTVmodeasdetailedon 11.RefertoAUTO
power power page
SEARCHtosetupyouravailableTVchannels.Detailsareonpage12.
Before plugging the UHF/VHF Rod Antenna into the
ANTENNA tN jack check that the pin is not bent. _f
it is bent, straighten the pin as illustrated, then plug
the pin into the ANTENNA IN jack.
Bent p_n
Plug
(Needs to be straightened) (straight pin)
FCC WARNING _This equipment may generate or use radio
frequency energy• Changes or modifications to this equipment
may cause harmful interference unless the modifications are
express]y approved in the instruction manual. The user could
lose the authority to operate this equipment if an unauthorized
change or modification is made,
UHF
Antenna
(Not supplied)
VHF
Antenna
(Not supplied)
*Some cable TV systems use scrambled
signals and require a special converter
to receive these channels Consult your
Ioca} cable company,
From Cable System
or Satellite Antenna
75-ohm
Coaxial Cable
WtF/UHF
Combiner
(Not supplied)
VHF/UHF _ --
Corn bh_at_on Antenna
, t ' •
(No supphed)
From Cable System
CABLE TV/ANTENNA CONNECTIONS
If you have separate UHF and
VHF antennas, you need an
optional combiner to connect
the antennas to the TV,