Instruction Manual

From the Phone Setting Menu:

1. Press the VOL (- or +) button to scroll to Register.

2. Press SELECT soft key. Register HS Registering... shows in the display.

3. Press and hold the Page button on base for about 3 seconds

4. “Registering” displays to indicate the base is now in registration mode.

5. If the registration is successful, the handset shows “Registration

complete” for 2 seconds and emits a conﬁrmation tone.

6. If the registration is failed (i.e. timeout), the handset shows

“REGISTRATION FAILED!” for 2 seconds and emits an error tone.

Remove Handset

De-registration cancels registration. During the de-registration process,

keep the handset near the base.

WARNING: It is not recommended that a handset be

deregistered unless absolutely necessary because once a

handset is deregistered, that handset’s telephone features

cannot be used until the handset is re-registered.

From the Phone Setting Menu:

1. Press the VOL (- or +) button to scroll to the Remove handset.

2. Press SELECT soft key. “Remove handset?” shows on the display.

3. Press the YES soft key to conﬁrm de-registration. then shows

“Press “REG” to initiate registration” in the handset.

NOTE: You can press the REG soft key to enter the registation mode again.

De-Register (Only applicable for base)

From the Phone Setting Menu:

1. Press the VOL (- or +) button to scroll to the Deregistration.

2. Press SELECT soft key. The list of all registered handsets will be shown,

and use the VOL (- or +) button to scroll to your selection.

3. Press the SELECT soft key. “Remove handset?” shows on the display.

Press YES soft key to conﬁrm de-registration. base emit a confirm tone

then shows “Press “REG” to initiate registration” in the handset.

Programming the Telephone

Add Headset (only applicable for base)

NOTE: This wireless headset option is only compatible with the RCA

25065RE1, 25265RE2 and 25270RE3 headsets.

From the Phone Setting Menu:

1. Press the vol(- or +) button to scroll to Add Headset;

2. Press the SELECT Sofykey. The screen will display Pairing...Please wait.

3. On the headset, press and hold the Talk On/Off button together with the

Volume+ button for 3 seconds. The LED indicators will begin blinking in

an alternate red and blue pattern.

4. If the registration is successful, a blue LED on the Headset will flash.

NOTE: Only one cordless Headset may pair with a base unit.