- Thomson 25-Channel Caller ID with Call Waiting Cordless Telephone User's Guide

26
Dial tone is OK, but • Make sure the TONE/PULSE setting is programmed
can't dial out correctly.
Handset does not ring • Make sure the RINGER switch on the handset is turned
to ON.
• You may have too many extension phones on your
line. Try unplugging some phones.
• See solutions for “No dial tone.”
You experience static, • Change channels
noise, or fading in • Is handset out of range? Move closer to the base.
and out • Does the base need to be relocated?
• Charge battery.
• Make sure base is not plugged into an outlet with
another household appliance.
Unit beeps • Place handset in base for 20 seconds to reset the
security code. If that doesn’t work, charge battery
for 12 hours.
• Clean charging contacts on handset and base with a
soft cloth, or an eraser.
• See solutions for “No dial tone.”
• Replace battery.
Memory Dialing • Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
• Make sure the TONE/PULSE setting is programmed
correctly.
• Did you reprogram numbers into memory after power
outage or battery replacement?
Problem Solution